Setting Up The Communications Port - GE DigitalFlow XGS868i Programming Manual

Appendix C. Programming the XGS868i Using PanaView™
C.2.2 Setting Up the Communications Port
Use the steps below to establish PanaView communications with the XGS868i.
1. Launch PanaView, as discussed in Chapter 3, Initial Setup, of the PanaView User's Manual.
2. Open the New Meter Browser window in the File menu and expand the network tree. Then, highlight the My
Computer (Name) branch by clicking on it.
3. Pull down the Edit menu by clicking on it in the menu bar.
4. Click on the New menu option to select it, and a submenu opens with two choices on it (see Figure 32).
Figure 32: The Edit Menu
88 DigitalFlow™ XGS868i Programming Manual