Husqvarna AUTOMOWER 420 Operator's Manual page 33

Network
APN settings
The product must specify APN settings to be able to use
and send data via the mobile net. Settings for
Husqvarna SIM is default.
3.13.9.3 Ultrasonic Automower
Ultrasonic function makes the product decrease
The
speed when the product comes near an obstacle. The
product operates at a lower speed if the
function is disabled.
To set the Ultrasonic function
1. Do steps 1–3 in To get access to the menu in the
display of the product on page 24 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Ultrasonic > Use .
3.13.9.4 Headlights
To set the schedule for the headlights
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 24 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Headlights > Schedule .
3. Select between Always ON , Evening only
Evening & night (19:00-07:00) or
(19:00-00:00),
Always OFF .
To set the Flashes when fault function
The headlights flashes if the product stops to operate
because of a fault if Flashes when fault is enabled.
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 24 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Headlights > Flashes when fault .
3. Use the OK button to enable or disable the
Flashes when fault function.
3.13.9.5 To avoid collisions with the Automower
The wear on the product and the Automower
decreases when you select Avoid collisions with mower .
1. Do steps 1–3 in To get access to the menu in the
display of the product on page 24 .
2. Use the arrow buttons and the OK button to move
through the menu structure
house > Avoid collisions with mower .
Note:
Avoid collisions with mower is selected it can
If
result in grass that is not cut around the charging
station.
1201 - 005 - 19.03.2021
®
450X
Ultrasonic
Accessories >
Accessories >
Accessories >
®
house
®
house
Accessories > Mower
Installation - 33