Flashlight - ABB HD5-S Original Instructions Manual

Three-position device
Table of Contents

Advertisement

Flashlight

The flashlight is in the front of the HD5 and can be used for short
periods when the ambient light is insufficient.
Note on duty cycle
For ambient temperatures ≤ 35°C, the flashlight should never be used longer than 15 min at a
time and max 60% on-time
For ambient temperatures over 35°C, the flashlight should never be user more than 10 min at a
time and max 40% on-time
On-time percentage = [on time/(on time + off time)] x 100
Caution
The increased heat can damage the device. Make sure to comply to the above requirements.
If the device had stopped working because of temperature rise, it will work again once the values have
dropped below the limits. However, there may still be damage to the electronics and a reduction in product
lifetime.
Attention! Hazards arising from glare
Avoid looking directly into the lens of the assist light. Looking directly into the lens, and the glare effect
which may result from it, can sometimes impair vision, cause irritation, and result in accidents.
2TLC010052M0201_A
15

Advertisement

Table of Contents
loading

Table of Contents