NEC SL1000 Features And Specifications Manual page 420

SL1000/SL1100
Feature Name
Caller ID
Central Office Calls, Answering
Central Office Calls, Placing
Class of Service
Clock/Calendar Display/Time and
Date
Code Restriction/Toll Restriction
Code Restriction Override/Toll Re-
I striction Override
Code Restriction, Dial Block/Toll Re-
striction, Dial Block
Conference
Conference, Voice Call/Privacy Re-
lease
Data Line Security
Delayed Ringing
Department Calling
Department Step Calling
Dial Pad Confirmation Tone
Dial Tone Detection
Dialing Number Preview
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Direct Inward System Access
(DISA)
Direct Station Selection (DSS) Con-
sole
Directed Call Pickup
Directory Dialing
Distinctive Ringing, Tones and Flash
Patterns
Do Not Disturb (DND)
Door Box
Flash
Flexible System Numbering
Flexible Timeouts
Forced Trunk Disconnect
Group Call Pickup
Group Listen
Handset Mute/Handset Cutoff
Handsfree and Monitor
1-410
Standard SIP
Yes Caller ID is shown only on ISDN or Analog CO
trunks that are directed at the SIP device. Caller
ID will not display for calls transferred to the SIP
device.
Yes
Yes
Yes
No
Yes
No
Yes
No
No
Yes Barge-In is not supported.
No
No
No
No
No
Yes
Yes
Yes
No
No
Yes
No
No
Yes Do Not Disturb (DND) can be set from the SIP de-
vice using dial access codes. In some cases Do
Not Disturb can be set via the SIP device but is
not system side DND.
Yes Door Box will not ring a SIP device. A SIP device
can call a door box but cannot activate the relay.
No
Yes
Yes
No
Yes
No
Yes Handset mute is a function of the SIP device.
Yes Hands-free is a feature of the SIP device.
Comments
IP Single Line Terminal (SIP)
ISSUE 2.0
Note
(SL1100)
(SL1100)