Pip Swap; Menu Operation; History; Switching Between Playback And Live - Bosch VSS8394/01T Operating Manual

VSS8394/01T Multiplexer | Operating Manual | Chapter 2
The PIP position can be changed via the View Settings
menu.

2.1.12 PIP Swap

The PIP Swap button toggles the PIP image with the full
screen image.

2.2 MENU OPERATION

Press the MENU button to display the on screen MAIN
menu. Toggle to switch ON/OFF.
Remark
If no selection is made within 30 seconds the on screen
display menu is automatically switched off.
MENU NAVIGATION
Follow the screen options and select using the
ROTARY wheel.
The ROTARY wheel controls the menu navigation as
follows:
• To scroll up/down the menu, turn the ROTARY
wheel to the required item. The highlighted text indi-
cates the selected menu option.
• Pressing the ROTARY wheel will either show the
available options (e.g. ON or OFF), or display the
sub-menu.
• To decrease, increase or change the value of a
selected menu item, turn the ROTARY wheel and
acknowledge by pressing the ROTARY wheel.
• To return to the previous menu, turn the ROTARY
wheel until the previous menu title is highlighted and
acknowledge by pressing the ROTARY wheel.
After pressing the menu button the following menu will
be displayed:
MAINMENU
HISTOR Y
SWITCH TO PLAYBACK VIEW
VIEW SETTINGS
TIME / DATE
SYSTEM SETTINGS

2.2.1 History

The history table shows all events that were caused by
an alarm, doorbell, motion or special alarm.
MAINMENU
H I ST O R Y
EVENT SOURCE
MOTION C AMERA 1
Bosch Security Systems | 2003-06
All manuals and user guides at all-guides.com
When you select HISTORY a list with the kind of alarm
(event), the source, time and date is displayed.
A maximum of 20 events are stored in the history list
(first in, first out). You can scroll through the history list
by turning the ROTARY wheel.
Events that are recorded are:
•
•
•
•
•
•
Alarm sources are:
•
•
•
•
2.2.2 Switching between playback and
live

2.2.3 View settings menu

The view settings menu enables you to change the
display on your monitor.
>
>
>
>
>
The following view settings can be altered:
>
TIM E D D - M M
9 : 23 2 4 - 01
Alarm
Motion
Tamper
Doorbell
Fail
Power
Camera - name
Intercom (only in case of Fail)
RCB (only in case of Fail)
Action/Alarm box (only in case of Fail)
You can switch between play-
SWITCH TO
back view (looking at images
PLAYBACK
from a Video Recorder) or live view
VIEW
(looking at live camera images)
MAIN MENU
VIEW SET T INGS
P I P PO SITION
HIDE TITLES
HIDE TIME/ DATE
BRIGHTNESS
C ON TR AS T
C OL O R
SHARPNESS
C AN CEL
PIP POSITION Set PIP (Picture-In-Picture) to top
right, bottom right, top left, bottom
left (shown by the quad image mov-
ing within the symbol)
HIDE TITLES Show or hide camera names in
Fullscreen, Quad and 3x3 mode.
Options are NO/YES.
EN | 8