18 Introduction to the manual
Equipment covered by the manual
For detailed information, see ACS580MV hardware manual.
Target groups and required qualifications
This manual is intended for people who have a thorough knowledge of the bypass- drive
system and the industrial environment and have obtained the required qualification.
Related manuals
See
List of related manuals
on the inside of the front cover.
User's responsibilities
It is the responsibility of those in charge of the bypass- drive to ensure that each person
involved in the handling, installation, operation or maintenance of the bypass- drive has
received the appropriate training and has thoroughly read and clearly understood the
instructions in this manual and the relevant safety instructions.
Intended equipment use
Those in charge of the bypass- drive must ensure that the bypass- drive is only used as
specified in the contractual documents, operated under the conditions stipulated in the
technical specifications and on the rating plate of the drive, and serviced in the intervals as
specified by ABB.
Use of the bypass- drive outside the scope of the specifications is not permitted.
Intended equipment use also implies that only spare parts recommended and approved by
ABB must be used.
Unauthorized modifications and constructional changes of the bypass- drive are not
permitted.
Cyber security disclaimer
This product is designed to be connected to and to communicate information and data via
a network interface. It is Customer's sole responsibility to provide and continuously ensure
a secure connection between the product and Customer network or any other network (as
the case may be). Customer shall establish and maintain any appropriate measures (such
as but not limited to the installation of firewalls, application of authentication measures,
encryption of data, installation of anti-virus programs, etc) to protect the product, the
network, its system and the interface against any kind of security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information. ABB and its
affiliates are not liable for damages and/or losses related to such security breaches, any
unauthorized access, interference, intrusion, leakage and/or theft of data or information.
Categorization by frame size and option code
Some instructions, technical data and dimension drawings which concern only certain
frame sizes are marked with the symbol of the frame size (e.g. 6R6, 10R6). The frame size
is not marked on the rating plate. To identify the frame size of your drive, see ACS580MV
catalogue.