Heat Sink/Fan Assembly - HP OMEN X Maintenance And Service Manual

Heat sink/fan assembly

Table 6-3 Heat sink/fan assembly description and part number
Description
Heat sink/fan assembly
NOTE: Liquid metal thermal grease is available as spare part number L65923-001.
Before removing the heat sink/fan assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery (see
Remove the heat sink/fan assembly:
1. Remove the two Phillips M2.0 × 2.5 screws (1) that secure the bracket to the computer.
2. Remove the bracket from the fan (2).
3. Disconnect the two fan cables from the system board (1).
4. Remove the three Phillips M2.0 × 5.5 screws (2) from each fan.
5. Loosen the seven captive Phillips screws (3) in the order indicated on the heat sink.
(Preparation for disassembly on page
Bottom cover on page
Battery and speakers on page
26).
27).
32).
Component replacement procedures
Spare part number
L57018-001
35