Prepared
Manfred Ortmann
Approved
2.2.4 Graphic Display Controller ( GDC ) Module
For a GDC module the 2.54 mm connectors X300 and X301 ( SSM-120-S-DV-P from Samtec )
and the 1.27 mm connector X302 ( FLE-120-01-G-DV-A-P from Samtec ) are available.
Detailed information on the GDC module see the manual to this board.
Do not plug the GDC module when the power supply is on !
Preliminary
Document Number
Checked
Date
2008-05-14
Revision
Storage
PA 3.5
Mycable01
14(36)