Table of Contents
Advertisement
5
Installing Disk Drives and Hot-Swap
Cage
Turn off the power switch and unplug the power
cord before installing or removing diskette drives.
5.1
3.5-inch Drive
1.
Open the front panel and remove the left panel of the housing. See
section 4 for more information on opening the housing panels.
2.
Remove the screws attaching the 3.5-inch drive frame (2 pieces) to the
housing.
3.
Secure a 3.5-inch drive on the drive frame with four screws as shown
below.
IDM Housing
7
Advertisement
Table of Contents
