To stop the alarm, simple press the red button located at the rear of the
enclosure. However, the Power LED will continue blinking until the power
supply is working properly.
Removing a Redundant Power Supply
1.
Unlock the power supply. This action also turns off the power supply.
2.
Lift the handle and carefully pull the power supply until it detaches from
the enclosure.
Installing a Redundant Power Supply
1.
Insert the power supply into the enclosure. Make sure the power voltage
switch is set correctly to the right voltage before turning on the power.
2.
Secure it with the lock (which also turns on the power supply).
Make sure that the power supply is properly
inserted.
13