Table of Contents
Advertisement
1.9.4
Card Installation
Follow these steps to install the VGA/LAN combo card.
1.
Remove a bracket cover opposite an empty PCI slot.
2.
Position the card over the PCI slot, then insert the card golden fingers
into the slot until the card fits in place.
3.
Secure the card with a screw.
4.
Connect the "wake-up on LAN" cable from CN27 on the system board
to CN2 on the card.
Figure 1-15
Installing the VGA/LAN Combo Card
1-24
User's Guide
Advertisement
Table of Contents
