Samsung NX-308 Programming & Installation Manual page 39

PROGRAMMING is displayed.
2. Dial 44.
Display shows C.O. or PBX TRUNK followed by three digits, each of which indicates
current status of each line.*
3. Enter 0 or 1 for all three outside lines.
0 = PBX line
1 = C.O. line
4. Press # key.
(*Default: 111)
# 45 External Call Forwarding
Designates the C.O. line that can be call forwarded to another outside telephone number.
1. Press # key.
PROGRAMMING is displayed.
2. Dial 45.
Display shows FORWARD LINE SET.
3. Enter 0 (deny) or 1 (allow) for each incoming C.O. line to be forwarded.
4. Press # key
(Default: 000)
Note: See program # 59.
# 46 Private or Non-Private Lines
Assigns each C.O. line for private or non-private use. Lines set for non-private use work like 1A2
operation. (Maximum of three additional parties may access line already in use.)
1. Press # key.
PROGRAMMING is displayed.
2. Dial 46.
Display shows PRIVACY or NONE and then PRIVACY: 0 NONE: 1. One second later the
current data is displayed.*
3. Enter new data (up to three digits) for each C.O. line.
4. Press # key.
(* Default: 000)
# 47 Dial 9 Group
Allows individual C.O. lines to be added to or removed from the line group that is accessed by dialling
9.
37