Starting The Scsi Setup; Terminating The Scsi Setup - Siemens D981 Technical Manual

SCSI Setup

Starting the SCSI Setup

You must enable the ultra-wide SCSI controller in the system BIOS to be able to
call the SCSI Setup. Call the BIOS Setup and set the SCSI Controller field in the
Peripheral Configuration menu to enabled.
²
Start your PC and press key combination
message appears:
Press <Ctrl> <A> for SCSI Select (TM) Utility!
The first menu of the SCSI setup, Configure/View Host Adapter Settings and SCSI Disk
Utilities is displayed.
Working with the keyboard
Use the following keys when running the program:
¤ ¥ ¤ ¥
to make selections
Ï
Ï
to accept a selection
^(VF` ^(VF`
to call the previous menu and to terminate the SCSI setup.
^)`
^)`
to reset to the default settings
^)` ^)`
to toggle display between color and monochrome mode
Also note the status line at the bottom of the screen.

Terminating the SCSI setup

Depending on the current menu level, you can display the previous menu by
>(6&@
>(6&@
pressing the
prompted to store them.
²
Keep pressing
Adapter Settings).
²
>(6&@ >(6&@
Press the
screen to terminate the SCSI Setup.
20 - English
key. If you have made changes in the current menu you will be
>(6&@ >(6&@
until you arrive at the first menu (Configure/View Host
key in the first menu and then follow the instructions on the
>&WUO@ >&WUO@ >$@ >$@
and , when the following
A26361-D981-Z120-9-7419
SCSI Setup