External Dvd Drive (May Be A Special Accessory); Port; Correct Handling Of Dvd-Roms; Information In The Case Of Any Faults - Bosch DCU 220 Operating Instructions Manual

Tablet computer (convertible)
Hide thumbs Also See for DCU 220:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16
en
24 | DCU 220 | Operation
5.10
External DVD
drive (may be a special accessory)
i
This DVD player is a CLASS 1 LASER PRODUCT
5.10.1

Port

Connect the USB connecting cable 1 684 465 688
to the DVD drive and the two USB ports of the
DCU 220 (Fig. 3, Item 3).
 The driver for the DVD drive is installed automa-
tically.
"
The DVD drive can be used.
i
Power is supplied by way of the USB connecting
cable 1 684 465 688 (max. 0.7 m). No power supply
unit is required.
5.10.2

Correct handling of DVD-ROMs

Make sure hands are clean and not greasy when
inserting the DVD-ROM in the DVD drive.
Never touch the unlabeled side of the DVD.
Do not write on the DVD, and do not affix any stickers.
Never use solvents such as spirit or paint thinners,
record cleaners or anti-static agents to clean a
soiled DVD.
Carefully wipe off any finger marks or dust with a
soft cloth working outwards from the center.
Never expose DVDs to high temperatures or direct
sunlight.
i
Regularly clean the DVD drive with cleaning disc for
the CD or DVD drive (see also Sec. 6.1.3).
5.11

Information in the case of any faults

Fault
Note
The DCU 220 cannot
The capacity of the internal storage bat-
be switched on and
tery is insufficient to start the DCU 220.
the display remains
Connect the external power supply unit.
blank or flickers.
If the DCU 220 cannot be started with
the external power supply unit, contact
customer service
DCU 220 A blue
One possible reason may be that
screen is displayed
the Bosch Bluetooth USB adapter is
after switching on
plugged in, in addition to the enabled
(after 5-10 minutes).
internal Bluetooth hardware.
Remedy:
1. Remove the Bluetooth USB adapter.
2. DCU 220 Reboot.
i
Additional instructions regarding troubleshooting
can be found in the user manual sec.8.
i
If the preset Win 10 settings are to be restored, start
the recovery process.
|
1 689 989 321
2019-06-04
6.

Maintenance

6.1

Cleaning

6.1.1
DCU 220
Only use a soft cloth and neutral detergents to clean
the housing and display of the DCU 220. Do not use
abrasive cleaning agents and coarse workshop cloths!
6.1.2

Data carrier

Clean the CD-ROM or DVD-ROM with a disk cleaning kit
or carefully wipe over the silver side of the disk with a
soft, lint-free cotton cloth. Never use paper towels, as
these could cause scratches.
6.1.3

DVD drive

Clean the DVD drive at regular intervals with a cleaning
disk for the CD-ROM or DVD drive. The appropriate
cleaning disks are available from most computer or en-
tertainment electronics shops.
Robert Bosch GmbH

Advertisement

Table of Contents
loading

Table of Contents