Setting The Signal Type - Silvercrest HG04735-US-TX Manual

The receiver can indicate the reception of a door
signal either both optically and acoustically ,
acoustically
22 US-EN
330151_silv_Funktuerklingel_content_US.indd 22
The signal indicator
steadily light up for 1 minute, to indicate that
the receiver is in synchronizing mode.
Press the chime button
while the receiver is in synchronizing mode. If
the receiver receives the signal, the steady white
light of the signal indicator
indicate that the synchronization is successful.
After 1 minute, the signal indicator
off and the receiver is in normal operation mode.
Press the chime button
product.

Setting the signal type

or optically .
on the receiver will
1
of the transmitter,
8
flickers 3 times to
1
1
to start using the
8
will switch
26.11.19 15:58