Sony XBR-65Z9D Service Manual page 229

APPENDIX-1
HOW TO TAKE OFF A REAR COVER (100")
1. Remove stand (Case of a Floor Stand)
Remove "TC1","TC2" and
Remove "FSC"
Pull to arrow direction Pull to arrow direction
"TC3"
Fix "Service Stand"
Remove screw Change from "Floor Stand"
：SCREW +PSW M6x20
：SCREW +PSW M6x20
To "Service Stand"
Note1: Please note that unless you take off the stand , you can not take off the rear cover. (In case of floor stand ,it looks possible but physically impossible.)
Note2:"Service Stand" is the stand bundled in the service panel(P-Mod) or supplied separately (P/N:4-689-998-01:for L/4-689-999-01:for R), this stand is only for temporal use at the
time of panel repair. So, please note that this is different from the original stand for the set.
229
XBR-65/75/100Z9D