Advertisement
Video equipmentfor playback
—
To Scart or DECODERsocket
Recording VCR
Controls
VCR's Display
Connect the second video equipmentto this VCR
as shown above. (Refer to the manual of second
video equipment for connection)
If the playback video source is connectedto the
Scart socket, the TV must be connected to the RF
OUTterminal of this VCR.
Note: If using this VCR for playback during
dubbing or other operation, you must use the
black Scart socket as a connector source.
|
VIDEO
| .
| | | PROGRAMME|||
||
NUMBER
[ /
Turn the VCR and TV on, then set the TV to the
video programme number.
AUX
Press the AUX button to display "L1", or "L2" in
the VCR's display.
Select "L2" to dub the sourceinput via the
DECODER socket or "L1" to dub the source input
via the Scart socket on the back of the VCR.
If "L1" or "L2" is not displayed, the picture of the
TV programme being received will be dubbed.
Insert a blank cassette into the VCR for recording,
and the cassette to be copied into the playback
VCR.
Advertisement
