Inserting A Charged Battery - Toshiba AT105-SP0160M User Manual

Inserting a charged battery

To insert a battery:
1 Wipe the connectors of the charged battery with a clean cloth
to ensure a good connection.
2 With the label side of the battery facing down, line up the
connector of the battery with that of the tablet, and then gently
insert the battery into the tablet at the angle of approximately
30 degrees.
3 Seat the battery securely in place and slide the battery lock to
the locked position.
(Sample Illustration) Inserting the battery
If the battery is leaking or its case is cracked, put on protective
gloves to handle it, and discard it immediately. Always dispose of
used batteries in compliance with all applicable laws and
regulations.
If the battery does not slide into the slot easily, move the battery
release lock to the unlocked position and try again. Do not force the
battery into position.
Getting Started
Changing the battery
35