Picture Settings - Toshiba 20DL74 Owner's Manual

Picture Settings

To select the brightness
Press BRIGHT on the Remote Control to adjust the brightness. You have three
selections to choose from:
DARK
Minimum Brightness
To select the picture mode
Press PICTURE on the Remote Control. You have four selections to choose from:
DYNAMIC
There are different setting parameters for DYNAMIC, MILD, THEATER and
USER mode as described in the following table:
DYNAMIC
PARAMETER
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
TINT
To adjust the picture quality
To adjust the BRIGHTNESS, CONTRAST, COLOR, SHARPNESS, TINT, and
BACKLIGHT settings individually, do the following:
1. Press MENU and press VOL
– or + to select .
2. Press CH or to scroll
either up or down to find the
function you need to adjust.
3. Press VOL – or + to adjust the
selected function.
4. Press MENU to return.
When you have finished adjusting
your settings, press MENU to exit.
16
NORMAL
Normal Brightness
MILD
MODE
MILD
50 50
100 80
50 50
3 3
0 0
MENU RETURN
BRIGHT
Maximum Brightness
THEATER
USER
THEATER
(factory setting)
50 50
40 100
50 50
3 3
0 0
[ 50]
[ 100]
[ 50]
[ 3]
[ 0]
ADJUST
BRIGHTNESS [ 50]
USER
Notes:
• If you adjust the parameters of
the picture setting in DYNAMIC,
MILD, or THEATER mode, these
parameters will be saved in
USER mode automatically.
• If you adjust the picture settings
parameters in USER mode, these
parameters will be saved in
USER mode automatically.
• The default picture setting mode
is DYNAMIC.
Note:
All settings except BACKLIGHT are
specific to AV1, AV2, and TV
modes. For example: BRIGHT-
NESS may be set to 80 in AV1 but
60 in AV2 Mode.
Pressing
Function
VOL–
BRIGHTNESS darker brighter
CONTRAST lower higher
COLOR paler deeper
SHARPNESS softer sharper
TINT reddish greenish
VOL+