Disconnecting The Gigabeat From The Computer - Toshiba U202-BK User Manual

24
Getting Started
Disconnecting the gigabeat® from the computer
NOTE
NOTE
After connection
(Sample Illustration) Battery level display on the gigabeat
while charging
Disconnecting the gigabeat
To disconnect the gigabeat
computer.
(Sample Illustration) Unplugging the USB cable from the computer
NOTE
You cannot use the gigabeat
❖
Operation cannot be guaranteed if you are connected to the
computer via a USB hub.
❖
When using a third-party general-purpose USB AC adapter to
charge the gigabeat
However, note that normal operation cannot be guaranteed.
❖
If a USB AC adapter is used to charge the gigabeat
battery level display on the gigabeat
shown below.
Charging
®
When the gigabeat
®
the gigabeat from the computer while "Do Not Disconnect" is
displayed on the gigabeat
when "USB Connected" is displayed. Disconnecting the gigabeat
when "USB Connected" is displayed may prevent normal startup. If
this happens, reconnect the gigabeat
disconnect it again when "USB Connected" is displayed.
®
when "USB Connected" is displayed.
®
, ensure that the supply voltage is 5V.
®
from the computer
®
, unplug the USB cable from the
is connected to a computer, do not disconnect
®
screen. Only disconnect the gigabeat
®
to the computer and then
®
, the
®
screen changes as
Charging complete
®
screen
®
®