Table of Contents
Advertisement
Component
Antennas
Antenna switch
Line out
(Headphones,
Speakers)
0ptical S/PDIF
digital audio
output port
Network port
USB 2.0 ports
DVI-I video port
Mini USB jack
Security lock slot
DC-IN
Introduction
Quick Tour
Description
Send and receive wireless signals to/from the
connected computer.
Slide the switch down
communication between your computer and the
dynadock™. Slide the switch up
your computer to the dynadock™ with a USB cable.
A standard 3.5 mm mini jack for stereo audio
output to headphones/headsets/speakers.
Connection point for digital audio equipment (e.g.
®
Dolby
Digital Surround Sound receiver and
speaker system).
Note: Requires an optical S/PDIF cable (not
provided) and an optical S/PDIF input jack on the
receiver.
Connection point for a 10/100 BASE-TX Ethernet
cable (not provided).
Connection points for USB 2.0 and 1.1 devices.
Note 1: Certain USB devices, such as optical disk
drives and hard disk drives, have high power
requirements. Due to the power output limitations
of the USB ports, you may not be able to operate
more than one such device at a time.
Note 2: If your USB device came with an AC
adaptor, be sure to connect the device to a power
outlet with the AC adaptor.
Connection point for a DVI monitor, or a VGA
monitor with use of the included DVI-I to VGA
adaptor.
Connection point for the provided USB cable, used
to connect the dynadock™ to your computer.
Note: When setting up a wireless connection, you
will need to use the USB cable temporarily to form
an association between the two devices. For more
information, see
"Setting up the dynadock™" on
page
20.
Attachment point for an optional security cable
(not provided) used to deter theft.
Socket for AC adaptor (provided).
Note: The dynadock™ requires an external power
supply, as it does not draw power from the
computer's USB bus.
[ ]
to enable wireless
[
]
to connect
17
Advertisement
Table of Contents
