LINKAGE
12. Assemble the upper end of the control rod to the
drive lever assembly by inserting a clevis pin (Fig.
0350).
4
13. Adjust the control rod so there is a .19" to .25" (.48 to
.64cm) space between the control rod clevis pin and
the bottom of the thumb latch slot (Fig. 0351).
4-16
Fig 0350
PICT-0714
Fig 0351
PICT-0715
14. Install a hairpin cotter into the clevis pin to secure
the control rod to the thumb latch assembly (Fig.
0352).
Fig 0352
15. Start the machine and operate the controls to ensure
proper operation. Adjust as necessary.
Floating Deck Mid-Size Service Manual
PICT-0691