Page 1 Satellite User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Customer Support Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 179 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ports.
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com. ❖ Or call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Customer Support Center within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Page 6 In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 9 Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States. Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products.
Page 11 VCCI Class B Information Modem Warning Notice This information is only applicable if your computer has a modem. Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN).
Page 12 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.
Page 13: Device Authorization
FH: This equipment uses FH-SS modulation. The interference range of this equipment is less than 10m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850...
Page 14: Radio Approvals For Wireless Devices
Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer. Not all devices are available on all models. Approved Countries/Regions for the Intel Link 5100/5300 Series This equipment is approved to the radio standard by the countries/regions in the following table.
Page 15 Malawi Martinique Monaco Morocco New Zealand Oman Paraguay Poland Qatar Russia San Marino Singapore South Africa Sri Lanka Tahiti Turk Islands United Kingdom Vatican Virgin Islands Approved Countries/Regions for the Intel Link 622ANHMW and 633ANHMW Series This equipment is approved to the radio standard by the countries/regions in the following table.
Page 16 Approved Countries/Regions for the Atheros Link AR5B95 Series This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia Bulgaria Chile Croatia...
Page 17 Ukraine Yemen Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 18 Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Liechtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK Iceland, Spain O: allowed x: forbidden ❖ To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply.
Page 19 Approved Countries/Regions for the Realtek This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia Cambodia China Croatia Denmark Egypt Finland...
Page 20 Approved Countries/Regions for the Realtek This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia Cambodia China Croatia Denmark Egypt Finland...
Page 21 UAE (United Arab Emirates) Uruguay Vietnam Approved Countries/Regions for the Realtek This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Australia Bahrain Bolivia...
Page 22: Bluetooth Wireless Technology Interoperability
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for...
Page 23 Approved Countries/Regions for use (Bluetooth technology) ® Bluetooth Card from Toshiba equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Argentina Belgium...
Page 24: Bluetooth Wireless Technology And Your Health
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 25: Regulatory Statements
Regulatory statements This product complies with any mandatory product specification in any country/ region where the product is sold. In addition, the product complies with the following: European Union (EU) and EFTA This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark accordingly.
Page 26: Optical Disc Drive Safety Instructions
(Sample shown below. Location of the label and manufacturing information may vary.) Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 27 EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL.
Page 28 Blu-ray Disc is a trademark of the BD Association. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 29: Table Of Contents
Contents Introduction... 37 This guide ...39 Safety icons ...40 Other icons used...40 Your computer’s features and Other documentation ...41 Service options ...41 Chapter 1: Getting Started... 42 Selecting a place to work ...42 Setting up a work environment ...42 Keeping yourself comfortable ...43 Precautions...43 Important information on your computer’s Setting up your computer ...45...
Page 30 Using the computer for the first time ...49 Opening the display panel ...49 Turning on the power ...50 Setting up your software...50 Registering your computer with Toshiba ...51 Adding optional external devices...51 Adding memory (optional) ...52 Installing a memory module ...52 Removing a memory module...58...
Page 31 Using an external keyboard...84 Using a mouse ...85 Connecting a printer ...85 Setting up a printer ...86 Turning off the computer ...86 Options for turning off the computer ...87 Using the Shut down command...89 Using and configuring Hibernation mode ...91 Using and configuring Sleep mode ...94 Closing the display panel ...97 Customizing your computer’s settings...97...
Page 32 Setting battery notifications ...125 Conserving battery power ...125 Power Plans...126 Using a hot key to set the Power Plan...127 Using the TOSHIBA eco power plan...128 Changing the main battery ...129 Removing the battery from the computer ...129 (tray-type drive) ...116 (tray-type drive) ...116...
Page 33 Using the Memory card reader...145 Inserting memory media...146 Removing memory media...146 Using the eSATA/USB combo port...147 Using the Ambient Light Sensor (ALS) ...148 Chapter 5: Utilities...149 TOSHIBA Assist ...150 Connect...151 Secure...152 Protect & Fix ...153 Optimize...154 TOSHIBA Application Installer...155 Setting passwords ...156 Using an instant password...156...
Page 34 Contents Using a user password ...158 Deleting a user password...159 TOSHIBA Face Recognition Utility...160 TOSHIBA PC Diagnostic Tool Utility...161 TOSHIBA HDD Protection Utility ...162 Mouse Utility ...163 TOSHIBA Hardware Setup...164 USB Sleep and Charge Utility ...166 Starting the USB Sleep and Charge Utility...166 USB Sleep and Charge ...166...
Page 35 If you need further assistance...206 Before you contact Toshiba ...206 Contacting Toshiba ...206 Other Toshiba Internet Web sites...207 Toshiba’s worldwide offices...208 Appendix A: Hot Keys/TOSHIBA Cards ... 210 Hot Key Cards ...210 Using the Hot Key Cards ...211 Application Cards...212 Using the Application Cards...213 Card Case...213...
Page 36 Contents Sleep mode ...217 Hibernation mode ...218 Output (Display switch) ...219 Display brightness ...220 Disabling or enabling wireless devices...221 Disabling or enabling the TouchPad™ ...222 Zoom (Display resolution) ...223 Keyboard hot key functions ...224 Appendix B: Power Cord/Cable Connectors...225 Glossary...226 Index...241...
Page 37: Introduction
You can wake the computer from Sleep mode by pressing the power button. See the “Mobile Computing” section of the Toshiba User’s Guide for more information on using power management settings to...
Page 38 (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 39: This Guide
Toshiba’s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.
Page 40: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 41: Your Computer's Features And Specifications
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Goes Wrong” on page Introduction...
Page 42: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. The “Instruction Manual for Safety and Comfort,” that is shipped with your computer, contains important safety information.
Page 43: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, included with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 44 Getting Started Selecting a place to work ❖ ❖ Read the “Avoid extended contact between computer base/palm rest and skin” section in the “Instruction Manual for Safety and Comfort” that is shipped with your computer. Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer.
Page 45: Important Information On Your Computer's Cooling Fan
Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Page 46: Connecting To A Power Source
TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 47 To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 48: Charging The Main Battery
Getting Started Charging the main battery ❖ Is unlit when the main battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet ❖ Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adaptor NOTE...
Page 49: Using The Computer For The First Time
Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Facing the front of the computer, locate the center of the display panel. Gently raise the panel. Adjust the display to a comfortable viewing angle.
Page 50: Turning On The Power
Getting Started Using the computer for the first time Turning on the power To turn on the computer: Make sure any external devices (such as the AC adaptor, if you plan to use AC power rather than battery power) are properly connected and ready.
Page 51: Registering Your Computer With Toshiba
Product registration can be completed by either visiting the Toshiba Web site at http://www.register.toshiba.com, or by clicking Start, All Programs, My Toshiba, and then Toshiba Registration. Failure to complete Product Registration will not diminish Customer rights under the Toshiba standard limited Warranty.
Page 52: Adding Memory (Optional)
NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See Installing a memory module Memory modules can be installed in the memory module slots on the base of the computer.
Page 53 The computer has two memory slots—Slot A and Slot B. You can install one or two memory modules. Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Sleep or Hibernation mode, data will be lost.
Page 54 Getting Started Adding memory (optional) (Sample Illustration) Locating the memory module slot cover Using a small Phillips screwdriver, loosen the captive screw that secures the memory module slot cover. (Sample Illustration) Removing the memory module slot cover Remove the memory module slot cover. Place the screw and the cover in a safe place so that you can retrieve them later.
Page 55 Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems. Carefully remove the new memory module from its antistatic packaging, without touching its connector. Locate an empty memory module slot on the underside of the computer.
Page 56 Getting Started Adding memory (optional) Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the memory module into the socket Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket.
Page 57 (Sample Illustration) Inserting the memory module into the slot NOTE For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A. Replace the memory module slot cover and secure it using the screw.
Page 58: Removing A Memory Module
Getting Started Adding memory (optional) Reconnect the cables. Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module.
Page 59 NOTE The following screen may appear when you turn on the power: If “Start Windows If one of the Safe Mode options is highlighted, it is best to press to go into Safe Mode, then shut down and restart the system, at Enter which time Windows When Safe Mode is suggested, this could be a sign that you may...
Page 60 Getting Started Adding memory (optional) Gently lift the memory module to a 30-degree angle and slide it out of the slot. (Sample Illustration) Removing the memory module Replace the memory module slot cover and secure it using the screw. Re-insert the main battery. For more information on inserting the main battery, see Turn the computer right side up.
Page 61: Checking Total Memory
Reconnect the cables. Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: ❖...
Page 62 AC adaptor. ❖ The Toshiba Recovery Wizard also provides the option of erasing your internal storage drive, without restoring the information on the drive. See more information.
Page 63: Recovering To Out-Of-Box State (Recommended Recovery Method)
Recovering to out-of-box state (recommended recovery method) Recovering an internal storage drive to its out-of-box state deletes all partitions on the drive and all information stored in those partitions. Be sure to save your work to external media before executing the recovery.
Page 64 Getting Started Recovering the Internal Storage Drive (Sample Image) Warning screen When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next. (Sample Image) Selecting a Process screen The Recovery of Factory Default Software screen appears.
Page 65: Recovering To A Custom Size Partition
(Sample Image) Recovery of Factory Default Software screen Click Next. A confirmation message displays reminding you that all data will be lost during the recovery process. Be sure to save your work to external media before proceeding (see your work” on page Click Next to begin the recovery.
Page 66 Getting Started Recovering the Internal Storage Drive The “Recover to a custom size partition” option restores your C: drive to its out-of-box state, and allows you to specify the size for the C: partition. You can resize and recover the C: drive using the utilities stored on your computer’s internal storage drive or using recovery DVDs/media, if you have created such media.
Page 67 Recovering the Internal Storage Drive When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next. (Sample Image) Selecting a Process screen The Recovery of Factory Default Software screen appears.
Page 68: Recovering Without Changing The Internal Storage Drive Partitions
Getting Started Recovering the Internal Storage Drive Click Next. A confirmation message displays reminding you that all data will be lost during the recovery process. Be sure to save your work to external media before proceeding (see your work” on page Click Next to begin the recovery.
Page 69 Click Yes to continue. (Sample Image) Warning screen When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next. (Sample Image) Selecting a Process screen...
Page 70: Creating Recovery Dvds/Media
Getting Started Recovering the Internal Storage Drive The Recovery of Factory Default Software screen appears. Select Recover without changing the hard drive partitions. (Sample Image) Recovery of Factory Default Software screen Click Next. A confirmation message displays reminding you that all data on the C: drive will be lost during the recovery process.
Page 71 Follow the procedure below to determine how much space you will need for storing your system’s recovery files. To create recovery DVDs/media: Click Start, All Programs, My Toshiba, and then Recovery Media Creator. The TOSHIBA Recovery Media Creator dialog box displays.
Page 72 Click the Create button in the TOSHIBA Recovery Media Creator utility dialog box. Follow the on-screen prompts to complete the copy process.
Page 73: Restoring From Recovery Dvds/Media
Restoring from recovery DVDs/media The recovery process deletes information stored on the internal storage drive. Be sure to save your work to external media before executing the recovery (see NOTE During the internal storage drive recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor.
Page 74 Click Yes to continue. When the Toshiba Recovery Wizard opens and the Selecting a Process screen displays, select Recovery of Factory Default Software and then click Next.
Page 75: Erasing The Internal Storage Drive
For more information, “Recovering the Internal Storage Drive” on page To delete all data and partitions from the internal storage drive: Access the Toshiba Recovery Wizard on your internal storage drive or on your recovery DVDs/media. ❖...
Page 76: Checking The Internal Storage Drive Operating Status
Getting Started Checking the internal storage drive operating status (Sample Image) Erase the hard disk screen Click Next. A confirmation message displays reminding you that all data on the internal storage drive will be lost. Be sure you have saved your work to external media (see work”...
Page 77: Installing Drivers And Applications
Installing drivers and applications The Toshiba Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Click Start, All Programs, My Toshiba, and then TOSHIBA Application Installer. Click Next.
Page 78 Getting Started Using the TouchPad™ Refer to the table below for specific instructions on performing each operation. NOTE The pointer is the icon (usually an arrow) that moves on the screen when you slide your finger across the TouchPad or move a mouse connected to your computer.
Page 79 Do the following: Scroll vertically Slide your finger along the right edge of the TouchPad in the direction you want to scroll. Repeat to scroll a longer distance. Scroll horizontally Slide your finger along the bottom edge of the TouchPad in the direction you want to scroll.
Page 80: Adjusting Touchpad™ Settings
Getting Started Using the TouchPad™ Do the following: Zoom in/out To zoom in: ❖ To zoom out: ❖ Adjusting TouchPad™ settings While you are typing, the on-screen pointer may seem to move or jump around “by itself” to random locations on the screen. The on-screen pointer may also seem to automatically select text, click buttons, and activate other user interface elements.
Page 81: Disabling Or Enabling The Touchpad
TouchPad setting options vary by computer model. The TouchPad settings are accessible through the Mouse Properties option of the Windows Control Panel. For more information, please visit www.support.toshiba.com, and enter the phrase “Mouse pointer jumps around as you type” into the Search field. Disabling or enabling the TouchPad™...
Page 82: Selecting Video Cables
HDMI™-CEC (Consumer Electronics Control) is a standard in the CE Industry which allows devices to work together over an HDMI™ cable. Toshiba computers with HDMI™-CEC include a Toshiba utility. (This may need to be installed via the Toshiba Application Installer). For instructions, see Installer” on page advantage of its capabilities which can allow you to: ❖...
Page 83: Connecting An External Monitor Or Projector
Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: Read the directions that came with the monitor to see if you first need to install new software. Connect the monitor’s video cable to the RGB (monitor) port on the side of the computer.
Page 84: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard ❖ External monitor only ❖ Built-in display and TV (or other external video device) ❖ TV (or other external video device) ❖ External monitor and TV ❖ Built-in display and external monitor (extended mode) ❖...
Page 85: Using A Mouse
Using a mouse You may want to use a mouse instead of the computer’s built-in TouchPad™. You can use a USB-compatible mouse. Connecting a printer NOTE Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 86: Setting Up A Printer
Getting Started Turning off the computer Setting up a printer NOTE Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure. If your printer does not support Plug and Play, follow these steps to set it up for the first time.
Page 87: Options For Turning Off The Computer
Options for turning off the computer Depending on the operating system installed, you have more than one option available for turning off the computer: Shut down, Hibernate, and Sleep. Each option has its advantages. ❖ Use the Shut down or Hibernate command if you will not be using the computer for several days or if you must turn off your computer.
Page 88 Getting Started Turning off the computer For information on how to use and configure Hibernation mode see “Using and configuring Hibernation mode” on page Sleep mode The Sleep command places the computer into a power-saving mode. Sleep saves the current state of the computer to memory so that, when you restart the computer, you can continue working from where you left off.
Page 89: Using The Shut Down Command
Using the Shut down command The Shut down command completely shuts down the computer without saving your work or the current state of the computer. This command closes all open programs, shuts down the operating system, and then turns off your computer. To turn off your computer using the Shut down command: Click Start.
Page 90 Getting Started Turning off the computer Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears. (Sample Image) Edit Plan Settings screen Click Change advanced power settings. The Advanced settings tab of the Power Options window appears.
Page 91: Using And Configuring Hibernation Mode
NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. ❖ Lid close action Set this option to Shut down if you want the computer to shut down when you close the display panel.
Page 92 Getting Started Turning off the computer Click Hibernate in the pop-up menu. The computer saves the state of all open programs and files, turns off the display, and then turns off. Configuring Hibernation mode options You can place the computer into Hibernation mode by either pressing the power button or closing the display panel.
Page 93 Double-click Power buttons and lid to display the actions that you can configure. (Sample Image) Advanced settings tab of Power Options screen Select Hibernate for the options you want. NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power.
Page 94: Using And Configuring Sleep Mode
Getting Started Turning off the computer Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the ON/OFF light glows white. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Page 95 Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears. (Sample Image) Edit Plan Settings screen To change the amount of time after which the computer enters Sleep mode: ❖ Under Put the computer to sleep, select the desired amount of time in both the On battery and Plugged in categories.
Page 96 Getting Started Turning off the computer Double-click Power buttons and lid to display the actions that you can configure. (Sample Image) Advanced settings tab of Power Options screen Select Sleep for the options you want. NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power.
Page 97: Closing The Display Panel
Starting again from Sleep mode To start up the computer from Sleep mode, press the power button until the ON/OFF light glows white. The computer returns to the screen(s) you were using. If you place the computer in Sleep mode by closing the display panel, you can start it again by opening the display panel.
Page 98: Moving The Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 99: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 100: Using The Keyboard
Learning the Basics Using the keyboard ❖ Back up your files to external media on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 101: Character Keys
NOTE To capture a print screen of the entire screen, press the Fn + PRTSC To capture only the active window displayed, press simultaneously pressing the (Sample Illustration) PRTSC key on the keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 102: Special Windows ® Keys
Learning the Basics Starting a program through programmed functions when pressed. Used in combination with the key, function keys marked with icons execute specific functions on the computer. For example, ON/OFF. For more information, see page 214. ® Special Windows keys (Sample Illustration) Special Windows Your computer’s keyboard has one key and one button that have...
Page 103: Starting A Program From The Start Menu
Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu. To start a program that has an icon in the All Programs menu, follow these steps, which use the ®...
Page 104: Starting A Program Using The Search Programs And Files Field
Learning the Basics Starting a program In the right part of the window, double-click the folder containing the program, in this case Program Files. Windows folder on the right side of the window. In the right part of the window, double-click Windows NT. In the right part of the window, double-click Accessories.
Page 105: Saving Your Work
Saving your work Before you turn off the computer using the Shut down command, save your work on the internal storage drive, flash media, or optical disc. This is one of the most important rules of computing. When you turn off the computer using the Sleep or Hibernate commands, your work should be there when you resume.
Page 106: Printing Your Work
Learning the Basics Printing your work File names The Windows contain up to 260 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all the letters, numbers, and other characters on the keyboard, except for these characters: \ / ? : * "...
Page 107: Backing Up Your Work
Click on the arrow in the upper-left corner of your Windows and then click Print. The program displays a Print dialog box. (Sample Image) Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print.
Page 108: Restoring Your Work
Learning the Basics Using the optical disc drive Restoring your work To restore information from your backup media to your internal storage drive, use the Restore option in the Windows Restore program. Look in the online Help or your operating system documentation for information on restoring files.
Page 109: Viewing Blu-Ray Disc™ Movies
NOTE For optimum DVD and BD performance, it is recommended that you play DVDs and BDs while running the computer on AC power. NOTE When viewing DVD and BD movies use the DVD or BD player software that came with your computer. Viewing Blu-ray Disc™...
Page 110: Optical Disc Drive Components
Learning the Basics Using the optical disc drive (Sample Image) Sound properties window ❖ If you want to use the internal speakers, click on the Speakers tab and click Set Default. ❖ Use the arrow keys on your keyboard to navigate within the Blu-ray Disc™...
Page 111: Media Control Buttons
Your optical disc drive may look like this: Drive in-use indicator light Eject button Manual eject hole (Sample Illustration) Optical disc drive Drive in-use indicator light—Indicates when the drive is in use. Eject button—Press to release the disc tray. Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing.
Page 112: Inserting An Optical Disc (Slot-Type Drive)
Learning the Basics Using the optical disc drive The Wireless antenna ON/OFF button allows you to enable/disable the computer’s Wi-Fi The Illumination ON/OFF button allows you to set the panel LED and keyboard backlight conditions. The Play/pause button allows you to start playing the disc, or will pause it if currently playing.
Page 113: Removing A Disc (Slot-Type Drive)
Use only standard (12 cm) CD, DVD, or BD Discs. Any other size or shape disc cannot be removed from this slot and may damage the system. Removing a disc (slot-type drive) Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing.
Page 114 If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 115: Playing An Audio Cd
Read/write data and multi-media files to recordable optical media. For more information regarding supported optical media formats please refer to your computer’s detailed specifications at pcsupport.toshiba.com. Learning the Basics Using the optical disc drive ® Player and use it to select and...
Page 116: Removing A Disc With The Computer On (Tray-Type Drive)
Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/recorders, in certain cases, your Toshiba optical disc drive may not record on certain optical media that bear the applicable logo, or play back optical media recorded by other computers or optical media recorders.
Page 117: Caring For Optical Discs
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 118: Chapter 3: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 119: Battery Notice
This is normal for all batteries. To purchase a new battery pack, see the accessories information included with your computer or visit the Toshiba Web site at accessories.toshiba.com. Use only batteries designed to work with your Toshiba computer.
Page 120: Power Management
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 121: Charging The Main Battery
Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. TECHNICAL NOTE: The recharging of the battery cannot occur when your computer is using all of the power provided by the AC adaptor to run applications, features, and devices.
Page 122: Monitoring Main Battery Power
Mobile Computing Monitoring main battery power To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours. NOTE It is seldom necessary to charge the RTC battery because it charges while the computer is on.
Page 123 HINT: Be careful not to confuse the battery light ( light ( ), and the power button light (near the upper-left corner of the keyboard). When the ON/OFF light or power button light flashes amber, it indicates that the system is suspended (using the Windows operating system Sleep command).
Page 124: Determining Remaining Battery Power
Mobile Computing Monitoring main battery power Determining remaining battery power NOTE Wait a few moments after turning on the computer before trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations.
Page 125: Setting Battery Notifications
Setting battery notifications You can set two notifications. Each notification can be set to alert you when a specified percentage of remaining battery power has been reached. You can also set the computer to enter Sleep mode or Hibernation mode or to completely power down when the notification goes off.
Page 126: Power Plans
Mobile Computing Monitoring main battery power ❖ How much you use the internal storage drive, optical disc drive, or other optional devices ❖ Where you are working, since operating time decreases at low temperatures There are various ways in which you can conserve power and extend the operating time of your battery: ❖...
Page 127: Using A Hot Key To Set The Power Plan
Select an appropriate plan for your work environment or create your own custom plan. Click Create a power plan in the left pane to set up a new plan. NOTE To edit a plan or to edit advanced settings, continue to the following steps.
Page 128: Using The Toshiba Eco Power Plan
For example, when this power plan is enabled, the brightness of the display is reduced and the interval before Sleep mode takes effect is shortened. To enable or disable the TOSHIBA eco power plan, press the eco Utility™ button.
Page 129: Changing The Main Battery
Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object.
Page 130 Mobile Computing Changing the main battery Slide the battery release lock to the unlocked position. (Sample Illustration) Unlocking the battery release lock Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. (Sample Illustration) Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately.
Page 131: Inserting A Charged Battery
Inserting a charged battery To insert a battery: Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that you cannot install it with reverse polarity.
Page 132: Taking Care Of Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 133: Maintaining Your Battery
Maintaining your battery Fully discharging your battery pack will allow better accuracy of the battery meter. To fully discharge your battery pack: ❖ Periodically, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Page 134 If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. In addition, Toshiba’s recycling initiatives include recycling programs, events and consumer promotions. For details, please visit www.laptops.toshiba.com/green.
Page 135: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs.
Page 136: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your computer. Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 137: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, notification area, and background pattern. Icons Start button Taskbar Notification area ® (Sample Image) Windows operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 138 Exploring Your Computer’s Features Exploring the desktop ❖ TECHNICAL NOTE: If you delete a large number of files or very large files from the internal storage drive, there may be insufficient space available in the Recycle Bin to hold these files. In this case, Windows delete the file(s) or cancel the deletion.
Page 139: Setting Up For Communications
Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 140: Connecting Your Computer To A Network
Click Dial-up. . For more information see will be lit on the system indicator panel. ® networking problems, see 198. ® , ask them for help when connecting to ® network. “Hot Keys/TOSHIBA Cards” on “Wireless ® access. If your...
Page 141: Connecting A Modem To A Telephone Line
Enter the phone number and account information of your Internet connection. Click Connect and let the program dial the number. The computer connects to the Internet. Connecting a modem to a telephone line (Available on certain models.) Your computer may come with a built-in modem that can be connected to a standard voice-grade telephone line.
Page 142: Exploring Audio Features
Exploring Your Computer’s Features Exploring audio features NOTE Connect the built-in modem only to ordinary analog phone lines. Never connect the built-in modem to a digital line (ISDN). Never connect the built-in modem to the digital connector on a public telephone or to a digital private branch exchange (PBX). Never connect the built-in modem to a key telephone system for residences or offices.
Page 143: Using External Speakers Or Headphones
When you have finished recording, click the Stop Recording button. The Save As dialog box appears. To save the file, type a file name, and then click Save. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers.
Page 144: Using An Expresscard
The Web Camera software, by default, should already be running. The Web Camera indicator light glows when the Web Camera is active. For more information on the software, click Start, All Programs, TOSHIBA, Utilities, and then Web Camera Application Help. Using an ExpressCard (Available on certain models.)
Page 145: Removing An Expresscard
Removing an ExpressCard Prepare the card for removal by clicking on the Show hidden icons button ( ), if necessary, in the notification area and then selecting the Safely Remove Hardware and Eject Media icon. Select the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later.
Page 146: Inserting Memory Media
Exploring Your Computer’s Features Using the Memory card reader The Memory card reader may also support other types of media. NOTE Do not use the Copy Disk function for this type of media. To copy data from one media to another, use the drag-and-drop feature of the Windows Inserting memory media The following instructions apply to all types of supported media...
Page 147: Using The Esata/Usb Combo Port
Gently press the card inward to release it. The card pops out slightly. Grasp the card and pull it straight out. (Sample Illustration) Removing memory media Do not remove memory media while data is being written or read. Even when the Windows to the media might still be in progress and your data could be destroyed.
Page 148: Using The Ambient Light Sensor (Als)
The ALS is enabled by default, but is automatically disabled when you are using the TOSHIBA eco Utility™. To enable or disable the ALS function, click Start, Control Panel, Hardware and Sound, and then Location and Other Sensors.
Page 149: Chapter 5: Utilities
❖ TOSHIBA Application Installer ❖ Supervisor password ❖ User password ❖ TOSHIBA Face Recognition Utility ❖ TOSHIBA PC Diagnostic Tool Utility ❖ TOSHIBA HDD Protection Utility ❖ Mouse Utility ❖ TOSHIBA Hardware Setup ❖ USB Sleep and Charge Utility ❖...
Page 150: Toshiba Assist
❖ TOSHIBA PC Health Monitor TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist.
Page 151: Connect
Utilities TOSHIBA Assist Connect The feature available in this category is: ❖ ® Bluetooth Settings (Sample Image) TOSHIBA Assist window – Connect tab...
Page 152: Secure
Utilities TOSHIBA Assist Secure The features available in this category are: ❖ Supervisor password ❖ User password (Sample Image) TOSHIBA Assist window – Secure tab...
Page 153: Protect & Fix
Protect & Fix The features available in this category are: ❖ TOSHIBA PC Diagnostic Tool Utility ❖ TOSHIBA HDD Protection Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab Utilities TOSHIBA Assist...
Page 154: Optimize
❖ TOSHIBA Hardware Setup ❖ TOSHIBA Zooming Utility ❖ TOSHIBA Button Support ❖ TOSHIBA Accessibility ❖ TOSHIBA Face Recognition Utility ❖ USB Sleep and Charge Utility ❖ TOSHIBA eco Utility™ (Sample Image) TOSHIBA Assist window – Optimize tab (Hardware Settings)
Page 155: Toshiba Application Installer
TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Click Start, All Programs, My Toshiba, and then TOSHIBA Application Installer. Click Next.
Page 156: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. TOSHIBA supports several types of passwords on your computer: ❖ An instant password—Secures your open programs and files when leaving the computer temporarily.
Page 157: Using A Supervisor Password
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 158: Using A User Password
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your...
Page 159: Deleting A User Password
To register a password for the power-on password functions: Click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab. Click the User Password icon. Click Registered. Enter your password, and then enter it again to verify.
Page 160: Toshiba Face Recognition Utility
TOSHIBA does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.
Page 161: Toshiba Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. NOTE The TOSHIBA PC Diagnostic Tool utility may show tests for features you do not have. This is normal and does not indicate a problem. To use the TOSHIBA PC Diagnostic Tool utility:...
Page 162: Toshiba Hdd Protection Utility
Utilities TOSHIBA HDD Protection Utility TOSHIBA HDD Protection Utility The TOSHIBA HDD Protection Utility controls your computer’s hard disk drive (HDD) protection feature, which parks the HDD whenever motion is detected on the computer. Using this utility, you can enable or disable hard disk drive (HDD) protection, and set the motion detector’s sensitivity level for AC power and battery...
Page 163: Mouse Utility
The settings you can change are divided into these categories: ❖ Buttons ❖ Pointers ❖ Pointer Options ❖ Wheel ❖ Hardware ❖ Device Settings You may see additional categories depending on your particular pointing device. Adjust the settings as desired, then click OK. Utilities Mouse Utility TOSHIBA Assist.
Page 164: Toshiba Hardware Setup
To access it: ❖ Click Start, All Programs, TOSHIBA, Utilities, and then HWSetup, or click the TOSHIBA Hardware Settings icon in the Optimize tab of The TOSHIBA HWSetup screen appears. (Sample Image) TOSHIBA HWSetup screen – General tab options The TOSHIBA HWSetup screen may have the following tabs: ❖...
Page 165 LAN—Allows you to set networking functions ❖ Illumination—Allows you to set the panel LED and keyboard backlight conditions (available on certain models) (Sample Image) TOSHIBA HWSetup screen - Illumination tab options ❖ Password—Allows you to set a user password ❖...
Page 166: Usb Sleep And Charge Utility
“USB Sleep and Charge function.” It also displays the remaining battery capacity. Starting the USB Sleep and Charge Utility To start this utility, click Start, All Programs, TOSHIBA, Utilities, and then USB Sleep and Charge. USB Sleep and Charge...
Page 167 NOTE ❖ When “USB Sleep and Charge function” is set to Enabled, USB bus power (DC 5V) will be supplied to the compatible port even when the power of the computer is turned OFF. USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports.
Page 168: Enabling Usb Sleep And Charge
Utilities USB Sleep and Charge Utility Metal paper clips or hair pins/clips will generate heat if they come into contact with USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag.
Page 169 Utilities USB Sleep and Charge Utility (Sample Image) TOSHIBA USB Sleep and Charge Utility screen NOTE With certain external devices, the USB Sleep and Charge function may not work no matter which charging mode you select. In those cases, disable USB Sleep and Charge in the utility and turn the...
Page 170: Toshiba Zooming Utility
Acrobat ❖ Icons on the desktop To access the TOSHIBA Zooming Utility: Click Start, All Programs, TOSHIBA, Utilities, and then Zooming Utility. The TOSHIBA Zooming Utility Properties screen appears. (Sample Image) TOSHIBA Zooming Utility Properties screen Select the desired option(s).
Page 171: Toshiba Button Support
Illumination ON/OFF and Mute buttons. These buttons are located on the system control panel directly above the keyboard. To access TOSHIBA Button Support: Click the TOSHIBA Button Support icon in the Optimize tab of TOSHIBA The TOSHIBA Button Support window appears.
Page 172: Toshiba Accessibility
Utilities TOSHIBA Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the press it once, release it, and then press a function key to activate the hot key function.
Page 173: Fingerprint Authentication Utility
TOSHIBA does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 174: Care And Maintenance Of Your Fingerprint Reader
Utilities Fingerprint Authentication Utility The Fast User Switching feature of the Windows is also supported. If user A is logged on and the fingerprint utility verifies the fingerprint of user B (who is already enrolled), the utility recognizes the fingerprint and switches the users. If your system supports power-on security, existing fingerprint samples can be used also for power-on authentication.
Page 175: Fingerprint Reader Limitations
TOSHIBA does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 176: Toshiba Eco Utility
The TOSHIBA eco Utility™ monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time. To access the TOSHIBA eco Utility™, do one of the following: ❖ Click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA eco Utility.
Page 177: Toshiba Service Station
This information is used to identify and provide a notification of system conditions that may affect the performance of your TOSHIBA computer. It may also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA's authorized service providers.
Page 178 Utilities TOSHIBA PC Health Monitor You may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via the Windows will automatically delete all collected information from the internal storage drive. The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its standard limited warranty in any way.
Page 179: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 180: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 181 Problems when you turn on the computer The computer displays the Recovery – Windows did not shut down successfully To continue, select Start Windows normally. This can happen if the computer was put into Sleep mode and the battery has discharged.
Page 182: The Windows Operating System Is Not Working
The output specifications of the AC adaptor must match the input specifications of the computer. If the specifications do not match, locate and use the AC adaptor that shipped with your computer. If the specifications do match, contact Toshiba. See page 206. ®...
Page 183: Using Startup Options To Fix Problems
The Windows ❖ The operating system responds differently from the normal routine. ❖ The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device.
Page 184: Internet Problems
Click one of the options listed in the window and then follow the on-screen instructions. You can connect to Support Online by clicking the Ask button and then clicking Microsoft Customer Support or by going to Toshiba support at pcsupport.toshiba.com. ®...
Page 185: Fixing A Problem With Device Manager
Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 186: Memory Problems
If Something Goes Wrong Memory problems Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be hardware or even software related. It is worthwhile checking for these first: Click Start, and then click the Shut down button in the lower-right corner of the Start menu.
Page 187 After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see your accessories information included with your computer, or visit the Toshiba Web site at accessories.toshiba.com.
Page 188: Keyboard Problems
If Something Goes Wrong Keyboard problems Keyboard problems NOTE To capture a print screen of the entire screen, press the Fn + PRTSC To capture only the active window displayed, press simultaneously pressing the If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself.
Page 189 ❖ Check that the monitor’s power cord/cable is firmly plugged into a working power outlet. ❖ Check that the cable connecting the external monitor to the computer is firmly attached. ❖ Try adjusting the contrast and brightness controls on the external monitor.
Page 190: Disk Or Storage Drive Problems
If Something Goes Wrong Disk or storage drive problems Small bright dots appear on your TFT display when you turn on your computer. Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology.
Page 191: Optical Disc Drive Problems
You can choose one or both options: ❖ Automatically fix file system errors ❖ Scan for and attempt recovery of bad sectors Click Start. Error-checking tests and repairs the storage drive. Your hard disk seems very slow. If you have been using your computer for a long time, your files may have become fragmented.
Page 192 For more information regarding supported optical media formats, refer to the complete detail specifications for your computer at pcsupport.toshiba.com. If the problem is with an optical data disc, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 193 You must close all other applications during BD playback. ❖ BD player does not support DVD playback. Please use the "TOSHIBA DVD Player" for DVD playback. ❖ BD playback feature support may vary with each BD. Please contact content publisher directly with any questions.
Page 194: Sound System Problems
If Something Goes Wrong Sound system problems Sound system problems No sound is coming from the computer’s speakers. Adjust the volume control. Try pressing Fn + Esc Check that the volume control on the computer is turned up. If you are using external headphones or speakers, check that they are securely connected to your computer.
Page 195: Resolving Expresscard Problems
Resolving ExpressCard Here are some common problems and their solutions: The slot appears to be dead. ExpressCards no longer work. Check the ExpressCard Click Start, Control Panel, System and Security, and then under System, click Device Manager. Double-click the appropriate ExpressCard, which will be listed under one of the categories shown, for example: Disk drives, Network adapters, Other, etc.
Page 196: Printer Problems
If Something Goes Wrong Printer problems Hot swapping (removing one ExpressCard another without turning the computer off) fails. Follow this procedure before you remove an ExpressCard Prepare the card for removal by clicking on the Show hidden icons button ( ), if necessary, in the notification area and then selecting the Safely Remove Hardware and Eject Media icon.
Page 197: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system’s V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com. If Something Goes Wrong Modem problems or in the instructions that came...
Page 198: Wireless Networking Problems
® adapter. ® Control Panel's Device Manager to verify ® adapter is recognized by the Windows . For more information see ® ) networking. ® adapter, will be lit). ® “Hot Keys/TOSHIBA Cards” on...
Page 199: Dvd And Bd Operating Problems
❖ Use IPCONFIG to verify that the computer has a useful IP address—one other than the private address of 169.254.xxx.xxx assigned by Windows Click Start to open the Start menu. Type Enter The IP address for each active network adapter will be displayed.
Page 200: Develop Good Computing Habits
“Checking device properties” on page on using Device Manager to view the optical disc drive properties. Check the Toshiba Web site for new information on optical disc drives and their operation. A blank screen appears while watching a DVD-ROM or BD- ROM movie or title.
Page 201: Data And System Configuration Backup In The Windows Operating System
On a regular basis, back up the information stored on your internal storage drive. Use Windows disc, or external hard disk. Here are some ways you can do this: ❖ Use the Windows entire computer to an optical disc, or external hard disk. ❖...
Page 202 If Something Goes Wrong Develop good computing habits Saving system configuration with restore points The System Restore feature of the Windows quickly creates restore points—‘snapshots’ of your Windows operating system configuration—and saves them for later recall. If you experience problems after installing some new hardware or software, you can easily select a previously established Control Point to ‘turn back the clock,’...
Page 203 An external hard drive is recommended in case the internal storage drive fails. No additional software is required. Most of the optical disc drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from optical discs.
Page 204 If Something Goes Wrong Develop good computing habits Click Back up your computer under the System and Security heading. Follow the on-screen instructions to back up your files. For more help, click Start, Help and Support, and search for “back up files.” General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD...
Page 205: Hibernation Mode
Install one item of hardware or software. Restart the Windows Use the new hardware or software for a while, noting any new problems. Make sure that your critical applications (email, business applications, etc.) are working correctly, and verify that important devices are still functioning. For each additional hardware or software item, repeat these steps, starting at step 1 if any of your critical data has changed, or starting at step 2 if no critical data has...
Page 206: If You Need Further Assistance
Toshiba’s Technical Support Web site For technical support, or to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com...
Page 207: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred ❖ Exact error messages and when they occurred For technical support, call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 208: Toshiba's Worldwide Offices
Germany Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court...
Page 209 United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. If Something Goes Wrong Toshiba’s worldwide offices The Rest of Europe Toshiba Europe (I.E.) GmbH...
Page 210: Appendix A: Hot Keys/Toshiba Cards
Appendix A Hot Keys/TOSHIBA Cards Hot keys and TOSHIBA Cards provide a quick way to modify selected system functions and to launch applications. There are two types of TOSHIBA Cards: Hot Key Cards and Application Cards. Hot Key Cards The Hot Key Cards are used to set or modify the following system functions: ❖...
Page 211: Using The Hot Key Cards
To use the Hot Key Cards: Press and hold the The TOSHIBA Cards appear along the top of the screen. (Sample Image) Hot Key Card display Select the desired option. The selected Card is displayed full-size with its available options below it.
Page 212: Application Cards
TOSHIBA Zooming utility For more information, refer to Zooming Utility” on page Disc Creator utility This Application Card launches the TOSHIBA Disc Creator utility. TOSHIBA Hardware Setup utility For more information, refer to Hardware Setup” on page TOSHIBA Button Support utility For more information, refer to Support”...
Page 213: Using The Application Cards
Using the Application Cards To launch an application using the Application Cards: Press and hold the The TOSHIBA Cards display at the top of the screen. (Sample Image) TOSHIBA Card display Click the “stacked” card on the far right of the display. The Application Cards are hidden under this card.
Page 214: Hot Key Functions
Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This TOSHIBA Card or hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones.
Page 215: Lock (Instant Security)
Lock (Instant security) This TOSHIBA Card or hot key blanks the display. Selecting this Card or pressing the hot key displays the following options: Fn + (Sample Image) Security options ❖ ❖ Fn + F1 hot key function activates instant security. The user logon screen will appear and a user with a valid account will need to log back on to gain access to the computer.
Page 216: Power Plan
Hot Keys/TOSHIBA Cards Hot key functions Power plan This TOSHIBA Card or hot key displays the power plans and cycles through the power plans. The properties of each power plan, and the power plans that are displayed by this function, are set in the Power Options window.
Page 217: Sleep Mode
Sleep mode This TOSHIBA Card or hot key places the computer into Sleep mode. For more information about Sleep mode, please see and configuring Sleep mode” on page Selecting this Card or pressing the hot key displays the following options:...
Page 218: Hibernation Mode
Hot Keys/TOSHIBA Cards Hot key functions Hibernation mode This TOSHIBA Card or hot key places the computer into Hibernation mode. If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hibernation mode” on page...
Page 219: Output (Display Switch)
Output (Display switch) This TOSHIBA Card or hot key cycles through the power-on display options (only the first option is available when you do not have an external monitor attached) (the last option is available only if you are in Extended Display Mode).
Page 220: Display Brightness
Built-in Display and TV). In extended desktop mode, the image is split into two sides, one side per display device. To swap sides, select Swap Image Display. Display brightness This TOSHIBA Card decreases or increases the screen brightness. This hot key decreases the screen brightness. Fn + This hot key increases the screen brightness.
Page 221: Disabling Or Enabling Wireless Devices
Disabling or enabling wireless devices This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: ❖ ❖ Fn + ❖ ❖ Selecting this Card or pressing the hot key displays the...
Page 222: Disabling Or Enabling The Touchpad
Hot Keys/TOSHIBA Cards Hot key functions Disabling or enabling the TouchPad™ This TOSHIBA Card or hot key enables/disables the TouchPad™. For more information on using the TouchPad, see the TouchPad™” on page Selecting this Card or pressing the hot key displays the...
Page 223: Zoom (Display Resolution)
Hot Keys/TOSHIBA Cards Hot key functions Zoom (Display resolution) This TOSHIBA Card or hot key switches screen resolution. Selecting this Card or pressing the hot key displays the following options: Fn + [Space bar] (Sample Image) Screen resolution options Cycle through the screen resolutions, then select the desired...
Page 224: Keyboard Hot Key Functions
Keyboard hot key functions Fn + This hot key takes a snapshot of your display screen. Fn + This hot key turns the TOSHIBA Zooming Utility to zoom out. This hot key turns the TOSHIBA Zooming Utility to Fn + zoom in.
Page 225: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. UL approved United Kingdom BS approved Australia AS approved...
Page 226: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS BD-ROM CD-ROM CD-RW CMOS COM1 COM2 Alternating Current Basic Input/Output System Blu-ray Disc™ Read-Only Memory bits per second Compact Disc Compact Disc Read-Only Memory...
Page 227 DIMM Dual Inline Memory Module Disk Operating System Dots Per Inch Digital Versatile (or Video) Disc DVD-ROM Digital Versatile (or Video) Disc Read-Only Memory EPROM Erasable Programmable Read-Only Memory eSATA external Serial Advanced Technology Attachment File Allocation Table Federal Communications Commission gigabyte Hard Disk Drive HDMI...
Page 228 Glossary SDRAM Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 229 backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. Basic Input/Output System (BIOS) — See BIOS. baud rate — The speed at which a communication device, such as a printer or modem, transmits information.
Page 230 Glossary cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD —...
Page 231 CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor —...
Page 232 Glossary document — Any file created with an application and, if saved to disk, given a name by which it can be retrieved. See also file. double-click — To press and release the pointing device’s primary button rapidly twice without moving the pointing device. In the Windows button, unless otherwise stated.
Page 233 file — A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. File Allocation Table (FAT) — The section of a storage drive that keeps track of the location of stored files.
Page 234 HDMI cables. See also HDMI. Hibernation — A feature of many Toshiba computers that saves to the internal storage drive the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 235 LAN (Local Area Network) — A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network. LED (Light Emitting Diode) — A solid state lamp (SSL) that uses light-emitting diodes (LEDs) as the source of light, which offers long life and high efficiency output.
Page 236 Glossary motherboard — The computer’s main circuit board that contains the processor, memory, and other primary components. MS-DOS prompt — See system prompt. multi-function drive — A DVD drive that can read and write to CD and DVD media. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation.
Page 237 password — A unique string of characters entered by a user to verify his or her identity to the computer or the network. PC Card — A credit-card-sized expansion card designed to increase the capabilities of computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter.
Page 238 Glossary Random Access Memory — See RAM. Read-Only Memory — See ROM. reboot — See boot, restart. removable disk — A disk that can be removed from a disk drive. A Flash drive is one example of a removable disk. resolution —...
Page 239 shortcut — See keyboard shortcut. Sleep — A feature of some Windows to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. software — See program. Compare hardware. solid state drive —A data storage device that utilizes solid-state memory as opposed to a hard disk (see also hard disk).
Page 240 Glossary Web — See World Wide Web. ® Wi-Fi — A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) —...
Page 241: Index
Index AC adaptor 46 AC power 120 AC power light 46 accessing network 140 adding memory check total memory 61 memory (optional) 52 optional external devices 51 adequate ventilation cooling fan 45 adjusting TouchPad™ settings 80 Ambient Light Sensor (ALS) using 148 Application Cards 212 audio features 142...
Page 242 RTC memory 119 running computer on battery power 118 safety precautions 132 setting notifications 125 battery indicator light 123 BIOS Setup see TOSHIBA Hardware Setup Blu-ray Disc™ using 109 button eco Utility™ 128 Illumination ON/OFF button 112 mute button 112...
Page 243 desktop creating new icon 137 exploring the 136 icons 137 recycle bin 137 standard features 137 Windows® operating system 136 Device Manager 185 checking properties 185 directing display output 83 disabling TouchPad™ 81 Disk Defragmenter 191 disk drive corrupted/damaged data files 191 missing files/trouble accessing a drive 190 running slow 191...
Page 244 Index FAT (File Allocation Table) 190 file extensions using 106 files backing up 100 file names 106 printing 106 restore 108 saving 105 using a file extension 106 fingerprint authentication 173 Fingerprint Authentication Utility using 173 function keys 101 headphones using 143 Help and Support Windows®...
Page 245 Connect to the Internet 140 connecting your computer 140 networking wireless 139 notification area 139 ON/OFF indicator light 123 online resources Toshiba 117 optical disc Auto-Run feature 115 caring for 117 handling 112 inserting 113 inserting (slot-type drive) 112 inserting (tray-type drive) 113...
Page 246 187 changing display properties 189 checking device properties 185 computer hangs when ExpressCard® inserted 195 computer will not power up 180 contacting Toshiba 206 corrupted/damaged data files 191 Device Manager 185 disk drive is slow 191 display is blank 188...
Page 247 ExpressCard® checklist 194 error occurs 196 hot swapping fails 196 not recognized 196 ExpressCard® checklist 194 ExpressCard® slot appears dead external display not working 189 external monitor 188 faulty memory 186 high-pitched noise 194 Internet bookmarked site not found 184 Internet connection is slow 184 keyboard not responding 180...
Page 248 Index computer 135 disposing of batteries 133 icons 40 precautions 43 safety precautions battery 132 saving files 105 screen does not look normal/flickers 189 screen problems blank screen 188 Search programs and files field starting a program 104 selecting a place to work 42 power plan options 126 video cables 82 setting...
Page 249 Connect tab 151 Optimize tab 154 Protect & Fix tab 153 Secure tab 152 TOSHIBA Button Support 171 TOSHIBA eco power plan 128 TOSHIBA eco Utility™ 176 TOSHIBA Face Recognition Utility TOSHIBA Hardware Setup 164 TOSHIBA HDD Protection Utility TOSHIBA PC Diagnostic Tool Utility...
Page 250 Index Help and Support 184 problem solving 182 Windows® Start menu starting a program 103 wireless networking 139 wizards Connect to the Internet 140...

This manual is also suitable for:

A660-bt2g23 A660-bt2g22 A660-bt2g25 A660-bt2n23 A660-bt2n25 A660-bt3g25x ... Show all

Toshiba A660-BT2N22 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys/Toshiba Cards

Appendix B: Power Cord/Cable Connectors

Quick Links

Related Manuals for Toshiba A660-BT2N22

Summary of Contents for Toshiba A660-BT2N22