BTS3900(A) GSM
Commissioning Guide
Step 9 Click Close to end the board configuration of the BTS.
----End
5.2.3 Configuring Logical Objects of the BTS on the SMT
This describes how to configure logical objects of the BTS. The BTS logical object configuration
consists of the cell configuration, carrier binding, and activation of cell configuration data.
Context
Procedure
Step 1 Add a cell. Click Site0, and double-click Site Configuration in the Function area.
The Site Configuration dialog box is displayed, as shown in
Issue 02 (2009-04-20)
Figure 5-11 Parameter Management dialog box
NOTE
The following part describes the configuration and binding of carriers based on one DRFU configured with
two carriers.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Commissioning the BTS (Transmission Unavailable)
Figure
5-12.
5-11