Using The Web - Samsung YXM1Z User Manual

Updating Helix Firmware
Occasionally we make improvements to the Helix firmware, which is the software that makes
your Helix work. Updating the firmware is a quick and easy process.
Remember that:
Your Helix must be docked in its cradle with a power adapter and must be connected to
I
your PC. You cannot update the firmware if Helix is not docked and powered.
Your PC must be connected to the Internet.
I
Using XM+Napster
If you have installed and use XM+Napster, it automatically checks the firmware when you
connect Helix to your PC. XM+Napster notifies you when it's necessary to update the
firmware. Simply follow the instructions.
Don't worry if you miss a firmware update. XM+Napster will always check whether your Helix
needs an update or not.
64
Updating Helix Firmware
Updating Helix Firmware
Using the Update
Tool
If you don't use XM+Napster, you can
update the Helix firmware manually.
1. Insert the XM+Napster CD in your PC's
CD-ROM or DVD drive. The XM+Napster
software should start automatically.
2. Click on Browse CD.
3. Click on Utils, then click on
XMFirmwareUpdateClient.
4. Follow the instructions on the PC
screen.
You can run this firmware update tool at
any time. If the firmware needs to be
updated, the tool will install it automati-
cally. If the firmware is already up-to-date,
nothing happens.

Using the Web

Point your Web browser to http://fwupdt.xmradio.com and follow directions.
65
Updating Helix Firmware