2-3.
ANT BOARD (CMT-BT80W/BT80WB)
Note: Arrange downward and diagonally.
cushion (C)
ANT board
lead wire with connector
2-4.
FRONT ARM ASSY
2 Put your finger into the notch portion of
the front arm assy and add the power
to the front side.
front arm assy
CMT-BT60/BT60B/BT80W/BT80WB
1 cushion (C)
–
–
1 two screws
(PTP2
5)
4 front arm assy
3 Lift up the front arm assy
by pulling forward.
– Front top view –
3 tapping screw
(B2.6)
2 lead wire
with connector
6 ANT board
5 tape (LCD)
4 Remove the ANT board
block in the direction
of an arrow.
11