Cleaning - Silvercrest SBF 2 B2 Operating Instructions Manual

The white LED in the housing of the USB
charger 1 goes out when a device is
connected
The USB charger 1 is overloaded and will no
♦
longer charge the attached devices. The internal
overcurrent protection has been triggered.
Disconnect all connected devices from the USB
charger 1. The white LED lights up immediately
and the USB charger 1 is ready for use.

Cleaning

CAUTION
To avoid irreparable damage to the appli-
►
ance, make sure that no moisture gets into it
during cleaning.
Do not use caustic, abrasive or solvent-based
►
cleaning materials. These could damage the
surfaces of the device.
SBF 2 B2
GB │ IE │ NI │
31 ■