OPERATING YOUR CLEANER 2-1 POWER CORD 2-2 HANDLE CONTROL TYPE ONLY • SLIDE TO THE STOP POSITION Vacuum-cleaner switches off (stand by mode) • SLIDE FORWARD TO MAX Suction capacity increases smoothly up to maximum. 2-3 USING CYCLONE FILTER NOTE When removing the plug from the socket, please take care to grasp the...
2-4 USING FLOOR TOOLS OPTION CHECK FILTER INDICATOR - TRANSPARENT TUBE When the light is illuminated, check the Cassette Filter and clean it. OPTIONAL (Dust Bag type) Check the Dust bag and change it. CREVICE DUSTING UPHOLSTERY OPTION PARQUET SPECIALIST HARD FLOOR...
MAINTAINING THE CASSETTE FILTER 4-1 EMPTYING THE CASSETTE FILTER(Optional) • Ensure completely dry before replacing. • Allow 12 hours for it to dry. NOTE The cassette filter should be washed thoroughly as well as emptied if: • the CHECK FILTER indicator lights continuously •...
4-2 CHANGING THE DUST BAG (Optional) OPTIONAL FOR CLOTH FILTER BAG After using, if the cloth bag is full of dust, clean the cloth filter bag and use it again. CLEANING THE CYCLONE FILTER (Optional) - CLEANING THE INNER PART OF CYCLONE FILTER VP-95B TYPE NOTE It is necessary to use...
CLEANING THE INLET FILTER NOTE : Do not allow the filter to become clogged as this may cause power reduc- tion or may damage the motor. OUTLET FILTER - IF YOU HAVE A PROBLEM PROBLEM Motor does not start. Suction force is gradually decreasing.
IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING: Do not use the vacuum cleaner when rug or floor is wet. Do not use to suck up water.