Panasonic Nanoe EH-NA65 Series Operating Instructions Manual page 12

Maintaining the nanoe™ outlet
• Use commercially available cotton swabs. (We recommend
the thin cotton swabs made for use with babies.)
• This maintenance allows the hair dryer to sustain the
generated level of nanoe™ over a long period.
1. Dampen the end of the
cotton swab with tap water.
2. A needle portion is located
deep within the nanoe™
outlet. Using the swab, rub
this portion gently about 5
times.
Maintaining the air inlet
Clean the air inlet once a month or over.
• When dust etc. has built up, detach the fi lter from the hair
dryer and remove the dust etc. using a toothbrush or vacuum
cleaner.
• Use a commercially available toothbrush.
1. Pull on the catch on the
bottom side of the fi lter to
detach.
12
EH-NA65_EU.indb 12 EH-NA65_EU.indb 12
Gently rub the tip of
the needle portion
cotton
swab
nanoe™ outlet
Filter
Catch
2. Remove any dust etc. adhered to the fi lter or air inlet grille.
• Remove the dust etc. adhered to the outside of the fi lter
using a vacuum cleaner. If this does not remove the dust,
use the thick part of your fi ngers to push the dust etc.
through the fi ne mesh on the internal side towards the
metal mesh on the external side, and scrub away carefully
with a toothbrush.
• Using the toothbrush, carefully scrub away any dust etc.
from the internal side of the fi lter.
• Using a vacuum cleaner or toothbrush, carefully remove
any dust etc. adhered to the air inlet.
• Rubbing forcefully with your nails may tear the fi lter, so
please use a toothbrush.
3. Attach the fi lter securely,
starting with the upper side.
• Keep pressing until you
hear a "click" from both
upper and lower catches.
17/10/2562 11:02:51 17/10/2562 11:02:51