ABB i-bus
®
KNX
Commissioning
Group telegrams
main groups 14...31
Options:
This parameter defines whether the telegrams with group addresses of the main groups 14 ... 31 are
filtered, routed or blocked.
Filter: The telegrams with the group addresses of the main groups 14 ... 31 from the KNX to the LAN
•
are filtered in accordance with the filter table, which is automatically calculated by the ETS.
Route: All group telegrams of main groups 14 ... 31 are routed without considering the filter table
•
settings.
•
Block: All group telegrams of main groups 14 ... 31 are blocked without considering the filter table
settings.
Physically addressed telegrams
Options:
This parameter defines whether physically addressed telegrams are filtered or blocked.
•
Filter: Only the telegrams from the KNX to the LAN that are to exit the line of the IPR/S to the LAN are
sent.
Block: Physically addressed telegrams are not processed by the IPR/S. With this setting it is not
•
possible to send physically addressed telegrams from a line of a lower level than the IPR/S to another
line, e.g. during programming.
Broadcast telegrams
Options:
This parameter defines whether broadcast telegrams are routed or blocked.
Route: Broadcast telegrams are routed.
•
Block: Broadcast telegrams are not processed by the IPR/S. With this setting it is not possible to send
•
broadcast telegrams from a line of a lower level than the IPR/S to another line, e.g. during
programming.
24 2CDC502099D0211 Rev. A | IPR/S 3.5.1
Filter
Route
Block
Important
This setting is useful only for commissioning and diagnostics. It should not be used during normal
operation.
As this setting can overload the KNX lines, a loss of telegrams could occur.
Filter
Block
Route
Block