Table of Contents
Advertisement
EN16
3 The massage heads rise up and stop where they least
contact the body.
Massage
Head
4
[Shoulder Position
Adjustment Mode]
5 When the shoulder position is matched, press
to begin the program.
•
The program will begin automatically in 15 seconds if the
Notes
<Target shoulder position>
•
may raise up based on the height for a person short in height.
(To make sure that the feet can reach the sole section when
simultaneously using the leg/foot massage.)
•
The shoulder position can be adjusted whenever the massage is operating.
(When using "MANUAL", it can not be adjusted.)
Be sure to put your head and shoulders on the backrest
then start the massage.
•
Do not move your head and shoulders away from the
backrest until the shoulder position is determined. If the
shoulder confirmation does not work well, an error will
display (U10), and the operation might end.
(See page EN29.)
indicate that the
<How to adjust>
Press
to adjust the position.
(Each press moves the massage
heads approximately 1.5 cm.)
button is not pressed.
Too high
Correct position of the massage head
(The point where the tapping action
should be felt.)
Too low
button
- Quick Links:
- Setting up the Unit
Hide quick links:
Advertisement
Table of Contents
