How To Configure The System; Configuring Bacnet - GE AF-600 FP BACnet Operating Instructions Manual

4 How to Configure the System

4.1 Configuring BACnet

4.1.1 Initialization Procedure
The Initialization Procedure is explained by the flow chart given below:
Initialization Parameter
General Settings
Name
Control Site
Control word source
ControlWord Timeout time
ControlWord Timeout Function
End of Timeout Function
Reset ControlWord Timeout
Diagnosis
ControlWord Profile
Drive Port Settings
Name
Protocol
Address
Baud Rate
Minimum Response Delay
Max Response Delay
Table 4.1: 1) Please see also section: Parameter Overview >Parameter List.
Parameter Number Default Value
O-01 Digital and control word
O-02
O-03
O-04
O-05 Resume setup
O-06
O-07
O-10 Drive protocol
Parameter Number Default Value
O-30
O-31
O-32
O-35
O-36
Setting for BACnet
Digital and control word
Drive RS-485
1.0 sec
Off
Do not reset
Set up
Setting for BACnet
Drive
1
9600 baud
10 ms
5000 ms
AF-600FP BACnet
4
Drive RS-485
1.0 sec
Off
Resume setup
Do not reset
Don't care
Drive protocol
Drive Option
1
9600 baud
10 ms
5000 ms
15