Huawei IRD6000 User Manual page 24

IRD6000
User Guide
Figure 2-5 Interface of equipment status information
NOTE
This interface is not for configuration and only displays some essential operating information of the
IRD6000.
Step 2 View the equipment status information, as shown in Table 2-5.
Table 2-5 Status parameters
Parameter
CI Slot1/CI Slot2
Total TS rate
Valid TS rate
BER (Bit Error
Rate)
Quality
Strength
TUNER
----End
Issue 02 (2012-12-05)
Description
Displays the operating status of the CI card slot.
When no CI card is inserted, the value is Empty. When a CAM is
detected, the CAM's CAS type is displayed.
Displays the total TS rate of input signals.
Displays the valid TS rate of input signals.
Displays the bit error rate (BER) of the current input signals.
Displays the signal quality of the current input signals.
Displays the signal strength of the current input signals.

Lock: The signal is locked.

Unlock: The signal is not locked or no signal is detected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Operation Instructions
19