Hitachi HF-BT1000 User Manual page 125

8. SIMULATING THE HARDWARE STATUS

8.1.4 Event log entries

In order to clearly show which log entries for hardware failure originate from the simulation

function, this function records event log entries listed in the following table.

Note that a log entry with Event ID 252 is recorded at the timing when you click Apply in

the Simulation Tool window. This log entry is recorded even when all "Settings" are not

specified.

Table 8-1 Event Log Entries Recorded by This Function

Event ID

250

HFBSIM_SYS

251

HFBSIM_SYS

252

HFBSIM_SYS

The %x above denotes the corresponding Setting in the Simulation Tool window.

8.1.5 Remote notification

This function notifies of the transition of the RAS software to simulation mode using trap

notification so that an SNMP manager that monitors this equipment in a remote location can

know that the hardware statuses it acquires and the trap notifications for hardware failure

(and hardware recovery) it receives are generated in simulation mode. In addition, the object

value for the operational mode of the RAS software is changed to the one for the simulation

mode.

NOTE

The contents of the hardware status that can be acquired and a trap notification

that can be notified are the same as in the normal mode. For details about the

objects of the extended MIB for HF-BT, see "4.5 Remote Notification".

Source

Type

Information HFBSIM