Table of Contents
Advertisement
2.6
Installing the First Nozzle (cont.)
3. Slide the jig/nozzle assembly over the threaded rod, fitting the jig into the welding boss while aligning the
contoured end of the nozzle so it matches the pipe arc.
4. Align the nozzle scribe marks with the pipe scribe marks and tighten the assembly in place, using the washer and
nut.
Model T9 Ultrasonic Flow Transducer Installation Guide
Jig/Nozzle Assembly
Threaded Rod
Welded Boss
Washer and Nut
Chapter 2. Installing Pipe Nozzles
13
Advertisement
Table of Contents
