Command Set; Input Commands - GE Druck DPI 740 User Manual

DPI 740 User Manual

6.4 Command Set

All commands are of the format described in 6.2. In the
following command description the start and terminating
characters have been removed for clarity. Parameters
enclosed in [ ] are optional.

Input commands

Command:
Format:
Description:
Note:Only use pressure P for this instrument.
Query:
Example: IC?
The instrument replies IC=P
Command:IR - Get input reading
Format: IR?
Description:Request for a reading
Example: IR?
The instrument replies IR=<value>
where: <value> is the reading in the
Query: This is a query only command.
IC - Set-up input
IC=<param type>
Set-up input to measure parameter <param
type>, the index `i` specifies the measurand.
<param type> can be any of the following:
P
I
V
T
The corresponding query command allows
the interrogation of the currently selected
parameter.
selected units (e.g., IR=1017.95)
pressure input
current input
voltage input
temperature input
(input = pressure)
K0200 Issue No. 1
45