For Windows - Pioneer DJ CDJ-2000NXS2 Connection Manual

Using the Multiplayers as the TRAKTOR
Series Audio Devices
To use the multiplayers as the TRAKTOR series audio output devices, follow the instructions below
to set up your PC/Mac and the TRAKTOR series.
 For Windows
1. Install the driver software to your PC/Mac.
Please download the latest version of the driver for your multiplayer from our support page.
(
http://www.pioneerdj.com/support/
2. Open the TRAKTOR series, go to [File] -> [Audio Setup] and choose [Pioneer CDJXDJ ASIO]
for your [Audio Device].
3. The multiplayer will be automatically selected as the audio output device.
If it is not selected automatically, go to [File] -> [Audio Setup] -> [Output Routing] and select it
manually.
 For Mac OS
To use multiple multiplayers as audio devices, it is not necessary to install the driver software,
however, you will need to set up an aggregated device. We have provided a Mac OS tool called
CDJ/XDJ Aggregator, which simplifies this procedure.
Download the CDJ/XDJ Aggregator from the "Software & firmware updates" from our support page.
(http://www.pioneerdj.com/support/)
If the downloaded file is still a zip file, double-click it to unzip.
Follow the steps below for the TRAKTOR series setup.
1. Connect the multiplayer (or multiplayers, if more than one are to be connected) to your Mac
using a USB cable per multiplayer.
2. Double click the [CDJ/XDJ_Aggregator] to create an aggregated device [Pioneer CDJ/XDJ].
3. Open [File] -> [Audio Setup] on the TRAKTOR series and select [Pioneer CDJ/XDJ] created in
the above step 2.
4. The multiplayer will be automatically selected as an audio output device.
If not, go to [File] -> [Audio Setup] -> [Output Routing] and select it manually.
)
5