Advertisement
Panel Maintenance function-3
仕様概略
3-2. Flow of Panel Maintenance-2 mode (It takes about 80 min.) :
The other is automatically activated when the TV is turned off with remote control after watching TV for 1500 hours or more.
If you have customer complaints for "image retention", please activate the Panel Maintenance in Menu.
1. Menu of Panel Maintenance
Main Menu
Panel Maintenance-1 mode
(for about 10 minutes)
1 hour later
(Because of Panel cooling)
Panel Maintenance-2 mode
(for about 1minute)
Finish
(Watching time is reset)
If power on after complete.
Panel maintenance
is complete.
Picture
Screen Settings
"Panel Maintenance"
(No display)
Power LED: Orange lighting
(screen)
Back to normal standby
LED: Red lighting
*North & Latin America models(U/C/X/W) No lighting
(Power on next)
If power on before complete. *3
Panel maintenance has been
interrupted. Please start again from
the Panel Maintenance menu.
There are 2 flows. One is executing manually from Menu.
2. TV turns off by remote control after watching TV
The Notification is displayed.
Scan
White thin line
LED: Orange lighting
(or Orange）
for total 1,500 hours or more
Watching TV
For total 1500 hours
*1
TV turns off by remote control
*2
TV turns off
automatically
(Note)
*1: When the TV is turned off with mains power
switch, this mode is not activated.
*2: If checked "Don't start... ", this OSD isn't
displayed when TV turns off until TV is
operated for 1500 hours again.
*3: When the TV is turned on during activating
this mode, this mode is stopped and cancelled.
OLED
67
Advertisement
