Table of Contents
Advertisement
6/31
Ambient conditions
NOTICE
The UPS may be used only as intended and with the accessories, mounting parts
and other components specified in this documentation. Components that are
not expressly mentioned must neither be attached nor connected. The same ap-
plies to cables and lines.
Only to be operated with the component configurations and combinations ex-
pressly defined and with the software and firmware specified in the correspond-
ing functional description.
The UPS can be used for the following panel PCs and control cabinet PCs:
Panel PC Rexroth IndraControl VR4
●
Panel PC Rexroth IndraControl VR3
●
Control cabinet PC Rexroth IndraControl PR4
●
Control cabinet PC Rexroth IndraControl PR3
●
The UPS may only be operated under the mounting and installation conditions,
in the position of application and under the ambient conditions (temperature,
degree of protection, humidity, EMC, etc.) specified in this documentation.
5 Spare parts, accessories and wear parts
5.1 External 24 V power supply unit
Ordering code
VAP01.1H-W23-024-010-NN
Tab. 5-1: Ordering data, 24 V power supply unit for UPS and IndraControl V-devices
6 Ambient conditions
Humidity
Operating temperature
Storage temperature
Shock protection
Overvoltage category
Contamination level
Mechanical strength
Tab. 6-1: Ambient conditions
Bosch Rexroth AG R911384727_Edition 03
IndraControl VAU 02.1 Uninterruptible
Risk of damaging the device if not expressly sta-
ted accessories, mounting parts and other com-
ponents, cables, lines, software and firmware
are used.
Part number
Description
R911171065
External 24 V power supply unit for UPS
and IndraControl V-devices
85% at 40°C (non-condensing)
0 to 45°C (with airflow 0.3 m/s)
-20 to 50 °C
IEC 60068-2-27
2
2, no condensation allowed
IEC 60068-2-64, acceleration: 2G
Power Supply
Advertisement
Table of Contents
