Vox Intercom (Default: Disable) - Kenwood KCA-HX5M Instruction Manual

Intercom
Pairing
Two-Way
Intercom
Multi-Way
Intercom
Three-Way
Conference
Phone Call
with Intercom
Users
Group
Intercom
Mesh
Intercom
Conference
with
Bluetooth
Intercom
Participant
Universal
Intercom
VOX Intercom
Intercom VOX
Sensitivity
HD Intercom
Advanced
Noise
Control™
KCA-HX5M EN
8. BLUETOOTH
INTERCOM SETUP

8.8 VOX Intercom (Default: Disable)

The VOX Intercom setting can be found in the settings
menu, accessible through Intercom Device Manager
for KENWOOD or MESH Utility for KENWOOD.
If VOX Intercom is enabled, you can initiate an
intercom conversation with the last connected
intercom friend by voice. When you want to start
intercom, say a word such as "Hello" loudly or blow
air into the microphone. If you start an intercom
conversation by voice, the intercom terminates
automatically when you and your intercom friend
remain silent for 20 seconds. However, if you manually
start an intercom conversation by tapping the Jog
Dial, you have to terminate the intercom conversation
manually.
However, if you start the intercom by voice and end
it manually by tapping the Jog Dial, you will not be
able to start intercom by voice temporarily. In this case,
you have to tap the Jog Dial to restart the intercom.
This is to prevent repeated unintentional intercom
connections by strong wind noise. After rebooting the
headset, you can start the intercom by voice again.
Motorcycle Bluetooth Communication System | 74
MENU