Advertisement
3
Installation
Intelligent Server Installation Method and Orientation
There are two ways to install the Intelligent Server as shown below: (1) rack mount (2) surface mount.
The rack mount installation requires a support bracket for a 19-inch rack. Please contact us if you need
the support bracket.
(1)Rack mount
A support bracket is required to be fixed to the
bottom (rear side) of the unit.
30.8
AC inlet side
REQUIREMENT
Do not install the unit in any of the following places.
• Humid or wet place
• Dusty place
• Place exposed to direct sunlight
• Place where there is a TV set or radio within one meter
• Place exposed to rain (outdoors, under eaves, etc.)
(Unit: mm)
308.4
30.8
LED side
(2)Surface mount
Standard installation
Screw hole for wall
mount (M4 × 4 pcs.)
4
Advertisement
