Table of Contents
Advertisement
1-1. Overview
1-1-1. BKMA-7030
The BKMA-7030 MPEG Decoder Board inputs the playback data from the hard disk of MAV-70XGI and
decodes its data to the video/audio signals.
For video, the video signals are decoded with MPEG2 MP@ML or 4:2:2P@ML compressed video
format, and the two-channels SDI video signals and two-channels analog composite video signals (when
the BKMA-7060 is used) are output.
For audio, the audio signals are decoded into four-channels MPEG1 Layer 2 or Linear PCM compressed
audio format, and the SDI embedded audio signal, AES/EBU audio signal, and analog audio signal (when
the BKMA-7060 is used) are output.
The BKMA-7030 consists of the following components.
. DEC-98A board
. Slot label
. Installation guide
. Installation manual
1-1-2. BKMA-7060
The BKMA-7060 D/A Converter Board is mounted on the BKMA-7030 MPEG Decoder Board.
When this board is mounted, the analog composite video signal and two-channels analog audio signals
can be output from the BKMA-7030.
The BKMA-7060 consists of the following components.
. DA-134 board
. Installation guide
. Screws
BKMA-7030/7060
Section 1
Installation
(1)
(1)
(1)
(1)
(1)
(1)
(4)
1-1 (E)
Advertisement
Table of Contents
