Huawei 2288H V5 User Manual page 19

2288H V5 Server
User Guide
Figure 2-13 Rear panel components 2
1
3
5
7
9
11
13
Table 2-4 Ports on the rear panel
Port
10GE
electrical port
10GE optical
port
VGA port
GE electrical
port
Serial port
Issue 04 (2018-09-04)
I/O module 1
I/O module 3
PSU sockets
Flexible NIC (optional)
Serial port
GE electrical ports
10GE optical ports
NOTE
I/O module 1, 2, and 3 can be rear drive modules or riser card modules. The preceding figure is for
reference only.
Type
10GBASE-T
10GE SFP+
DB15
1000BASE-T
RJ45
Copyright © Huawei Technologies Co., Ltd.
2 I/O module 2
4 Power supply unit (PSU) 2
6 PSU 1
8 USB 3.0 ports
10 Management network port
12 VGA port
- -
Quantit Description
y
2 The 2288H V5 has two types of
mainboards. One mainboard provides two
10GE and two GE electrical ports. The
2
other motherboard provides two 10GE
optical ports and two GE electrical ports.
You can select either of them as required.
NOTE
10GE electrical ports or optical ports are
integrated service network ports on the server
mainboard.
1 The VGA port is connected to a terminal,
such as a monitor or KVM.
2 Service network port integrated on the
server mainboard.
1 The serial port is used as the system serial
port by default. You can set it as the iBMC
serial port by using the iBMC CLI. This
port is used for debugging.
2 Components
10