Sharp SD-SG11 Operation Manual page 38

SD-SG11
Editing a Recorded MiniDisc (continued)

To divide a track
1
Play the track which you want to divide into two, and press the MD
button at the point where you want to divide the track.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select
"DIVIDE" by pressing the REC LEVEL/CURSOR
3
Within 10 seconds, press the ENTER button.


To cancel the operation, press the NAME/TOC EDIT button.
4
Press the ENTER button again.


The track is divided, and the unit is stopped at the beginning of the second of the
two tracks.


The numbers of the tracks which come after the divided track are automatically
increased by one.
Notes:


If you divide a track that has a name and the date of recording, the two new tracks
will have the same name and the date of recording.


However, if there is not enough space to memorize the characters in "TOC", the
second track will not be named.


Each disc can hold up to 255 tracks. However, even if the number of assigned
tracks has not reached 255, it might not be possible to make any further divisions
of tracks.
E-35

To move a track
1
While in the stop mode, select the track you want to move by
pressing the
moved, and then press the MD
or button.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select
"MOVE" by pressing the REC LEVEL/CURSOR
3
Within 10 seconds, press the ENTER button.
4
Select the new track position by pressing the


To cancel the operation, press the NAME/TOC EDIT button.
5
Press the ENTER button again.


The track is moved, and the unit is stopped at its beginning.
01/7/9
or button. Or start playing the track to be
button.
or button.
or button.
25-37.fm