Bosch AXT Rapid 2000 Original Instructions Manual page 3

OBJ_BUCH-920-005.book Page 6 Friday, November 20, 2015 1:23 PM
OBJ_BUCH-2380-003.book Page 3 Thursday, March 1, 2018 3:38 PM
OBJ_BUCH-2380-003.book Page 3 Thursday, March 1, 2018 3:38 PM
6 | English
It is recommended for increased

electrical safety to use a Residual
OBJ_BUCH-2380-003.book Page 3 Thursday, March 1, 2018 3:38 PM
Current Device (RCD) with a tripping
For increased electrical safety use a For increased electrical safety use a


current of not more than 30 mA. Al-
Residual Current Device (RCD) with a
Residual Current Device (RCD) with a
ways check your RCD every time you
tripping current of not more than
tripping current of not more than
use it.
30 mA. Always check your RCD every
For increased electrical safety use a
30 mA. Always check your RCD every

time you use it.
Use only extension cables that are in-
Residual Current Device (RCD) with a
time you use it.

tended for outdoor use and are pro- Use only extension cables that are in-
tripping current of not more than

Use only extension cables that are in-

tected against splashes of water.
tended for outdoor use and are pro-
30 mA. Always check your RCD every
tended for outdoor use and are pro-
tected against splashes of water.
Do not touch the plug or socket with time you use it.

tected against splashes of water.
wet hands. Do not touch the plug or socket with
Use only extension cables that are in-


Do not touch the plug or socket with

wet hands.
tended for outdoor use and are pro-
Do not run over, crush or pull the

wet hands.
tected against splashes of water.
power supply cable or extension
Do not run over, crush or pull the

Do not run over, crush or pull the
lead, otherwise it may be damaged.
power supply cord or extension cord,
Do not touch the plug or socket with


power supply cord or extension cord,
Protect the cable from heat, oil and
wet hands. otherwise it may be damaged. Pro-
otherwise it may be damaged. Pro-
sharp edges.
tect the cable from heat, oil and sharp
Do not run over, crush or pull the

tect the cable from heat, oil and sharp
edges.
Other persons and animals should re-
power supply cord or extension cord,

edges.
main at a distance of 3 metres or
otherwise it may be damaged. Pro- Keep other persons and animals at a

more when the machine is being
distance of 3 metres or more when
tect the cable from heat, oil and sharp
Keep other persons and animals at a

used. The operator is responsible for
edges. the machine is being used.
distance of 3 metres or more when
third persons in the working area.
Keep other persons and animals at a Always use original Bosch accesso-
the machine is being used.
 
Bosch can assure flawless function-
ries and spares. We cannot be re-
distance of 3 metres or more when

Always use original Bosch accesso-

ing of the machine only when original
sponsible for damage or malfunction the machine is being used.
ries and spares. We cannot be re-
accessories are used.
when other such items are used.
Always use original Bosch accesso-
 sponsible for damage or malfunction
Become familiar with the instruction
Become familiar with the instruction
ries and spares. We cannot be re-


when other such items are used.
manual before attempting to operate
manual before attempting to operate sponsible for damage or malfunction
Become familiar with the instruction
this machine.
 this machine.
when other such items are used.
manual before attempting to operate
Avoid wearing loose-fitting clothing,
Avoid wearing loose-fitting clothing,
Become familiar with the instruction



this machine.
hanging cords or ties.
hanging cords or ties.
manual before attempting to operate
Avoid wearing loose-fitting clothing,
this machine.
Only operate the machine in open
Only operate the machine in open



hanging cords or ties.
space (e. g. not too close to a wall or
space (e. g. not too close to a wall or
Avoid wearing loose-fitting clothing,

other fixed objects) and on a firm,
other fixed objects) and on a firm,
hanging cords or ties. Only operate the machine in open

level surface.
level surface.
space (e. g. not too close to a wall or
Only operate the machine in open

Do not operate the machine on paved
space (e. g. not too close to a wall or Before starting the machine, check
other fixed objects) and on a firm,


or gravel surface where ejected mate-
that all screws, nuts, bolts and other
other fixed objects) and on a firm,
level surface.
rial could cause injury.
fasteners are properly secured and level surface.
Before starting the machine, check

that guards and screens are in place.
Before starting the machine, check
Before starting the machine, check
 that all screws, nuts, bolts and other

Replace damaged or unreadable
that all screws, nuts, bolts and other
that all screws, nuts, bolts and other
fasteners are properly secured and
warning and operating labels.
fasteners are properly secured and
fasteners are properly secured and
that guards and screens are in place.
that guards and screens are in place.
Before starting the machine, make
that guards and screens are in place.

Replace damaged or unreadable
certain that the chute assembly is Replace damaged or unreadable
warning and operating labels.
F 016 L81 436 | (20.11.15)
empty.
warning and operating labels.
Before starting the machine, make

Before starting the machine, make

Bosch Power Tools certain that the chute assembly is
certain that the chute assembly is
empty.
empty.
Bosch Power Tools
Bosch Power Tools
Replace damaged or unreadable
warning and operating labels.
Keep your face and body away from Keep your face and body away from
Before starting the machine, make



the chute assembly.
the chute assembly.
certain that the chute assembly is
empty.
Do not allow hands or any other part
Do not allow hands or any other part


of the body or clothing inside the
Keep your face and body away from
Keep your face and body away from
of the body or clothing inside the


the chute assembly. chute assembly, discharge chute or
the chute assembly.
chute assembly, discharge chute or
near any moving part.
Do not allow hands or any other part
Do not allow hands or any other part
near any moving part.


Keep proper balance and footing at
of the body or clothing inside the
of the body or clothing inside the

Keep proper balance and footing at

all times. Do not overreach. Never chute assembly, discharge chute or
chute assembly, discharge chute or
all times. Do not overreach. Never
stand at a higher level than the base
near any moving part.
near any moving part.
stand at a higher level than the base
of the machine when feeding materi-
Keep proper balance and footing at
Keep proper balance and footing at


of the machine when feeding materi-
al.
all times. Do not overreach. Never
all times. Do not overreach. Never
al.
Always stand clear of the discharge
stand at a higher level than the base
stand at a higher level than the base

Always stand clear of the discharge
of the machine when feeding materi- zone when operating the machine.
of the machine when feeding materi-

zone when operating the machine.
al.
al. When feeding material into the ma-

chine be extremely careful that piec- When feeding material into the ma-
Always stand clear of the discharge
Always stand clear of the discharge



es of metal, rocks, bottles, cans or
zone when operating the machine.
chine be extremely careful that piec-
zone when operating the machine.
other foreign objects are not includ-
es of metal, rocks, bottles, cans or
When feeding material into the ma-
When feeding material into the ma-


ed.
other foreign objects are not includ- chine be extremely careful that piec-
chine be extremely careful that piec-
If the cutting mechanism strikes any
es of metal, rocks, bottles, cans or
es of metal, rocks, bottles, cans or ed.

foreign object or if the machine
other foreign objects are not includ-
other foreign objects are not includ-
If the cutting mechanism strikes any

should start making any unusual
ed.
ed.
foreign object or if the machine
noise or vibration, immediately
If the cutting mechanism strikes any
If the cutting mechanism strikes any
 should start making any unusual

switch off and allow the cutter to
foreign object or if the machine
foreign object or if the machine
noise or vibration, immediately
stop. Remove the plug from the
should start making any unusual
should start making any unusual
switch off and allow the cutter to
mains supply and take the following
noise or vibration, immediately
noise or vibration, immediately
stop. Remove the plug from the
steps:
switch off and allow the cutter to
switch off and allow the cutter to
mains supply and take the following
– Inspect for damage.
stop. Remove the plug from the
stop. Remove the plug from the
steps:
– Replace or repair any damaged
mains supply and take the following
mains supply and take the following
– Inspect for damage.
parts.
steps:
steps:
– Check for and tighten any loose
– Replace or repair any damaged
– Inspect for damage.
– Inspect for damage.
parts.
parts.
– Replace or repair any damaged
– Replace or repair any damaged
Do not attempt to repair the machine
– Check for and tighten any loose
parts.
parts.

unless you are qualified to do so.
– Check for and tighten any loose
parts.
– Check for and tighten any loose
parts.
Do not allow processed material to parts.
Do not attempt to repair the machine


build up in the discharge zone; this
Do not attempt to repair the machine
Do not attempt to repair the machine
unless you are qualified to do so.


may prevent proper discharge which unless you are qualified to do so.
unless you are qualified to do so.
Do not allow processed material to

can result in kickback of material
Do not allow processed material to
Do not allow processed material to

build up in the discharge zone; this

through the chute assembly.
build up in the discharge zone; this
build up in the discharge zone; this
may prevent proper discharge which
may prevent proper discharge which
can result in kickback of material
can result in kickback of material
through the chute assembly.
through the chute assembly.
English | 3
English | 3
English | 3
Bosch Power Tools
F 016 L81 414 | (1.3.18)
F 016 L81 414 | (1.3.18)
F 016 L81 414 | (1.3.18)