Yamaha HTR-5990 Owner's Manual page 117

■ AUTO SETUP
Before AUTO SETUP
Error message
Connect MIC! Optimizer microphone is not connected.
Unplug HP! Headphones are connected.
During AUTO SETUP
Error message
Front L/R channel signal(s) is (are) not
E-1:NO FRONT SP
detected.
E-2:NO SURR.SP
A surround channel signal is not detected.
E-3:NO PRNS SP A presence channel signal is not detected.
Only right surround back channel signal is
E-4:SBR->SBL
detected.
E-5:NOISY Background noise is too loud.
Surround back speaker(s) is (are)
E-6:CHECK SUR. connected, though surround L/R speakers
are not.
The optimizer microphone was unplugged
E-7:NO MIC
during the AUTO SETUP procedure.
The optimizer microphone does not detect
E-8:NO SIGNAL
test tones.
The AUTO SETUP procedure was
E-9:USER CANCEL
cancelled due to user activity.
E-10:INTERNAL
An internal error occurred.
ERROR
Cause
Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.
Unplug the headphones.
Cause
Select the front speakers with SPEAKER A or B.
Check the front L/R speaker connections.
Check the surround speaker connections.
Check the presence speaker connections.
Connect the surround back speaker to the LEFT
SURROUND BACK SPEAKERS terminal if you
only have one surround back speaker.
Try running AUTO SETUP in a quiet environment.
Turn off noisy electric equipment like air conditioners
or move them away from the optimizer microphone.
Connect surround speakers when you use (a)
surround back speaker(s).
Connect the supplied optimizer microphone to
OPTIMIZER MIC jack on the front panel.
Check the microphone setting.
Check the speaker connections and placement.
Run AUTO SETUP again.
Run AUTO SETUP again.
TROUBLESHOOTING
Remedy
Remedy
See
page
30
—
See
page
—
13
13
13
13
—
—
13
30
30
13
30
30
113