Resetting The Panel Operation Time - Sony KDL-40HX750 Service Training Manual

5. Using the information provided in the table, verify the Model ID and
Product ID are correct.
Model Name Destination
KDL‐40HX750 LA/MX
KDL‐40HX750 LA/MX
KDL‐40HX750 LA/MX
KDL‐46HX750 US/CND
KDL‐46HX750 US/CND
KDL‐46HX750 US/CND
KDL‐46HX750 LA/MX
KDL‐46HX750 LA/MX
KDL‐46HX750 LA/MX
KDL‐46HX751 LA/MX
KDL‐46HX751 LA/MX
KDL‐46HX751 LA/MX
KDL‐55HX750 US/CND
KDL‐55HX750 US/CND
KDL‐55HX750 LA/MX
KDL‐55HX750 LA/MX
KDL‐55HX751 LA/MX
KDL‐55HX751 LA/MX
KDL‐55HX751 US/CND
KDL‐55HX751 US/CND
KDL-40HX750/46HX750/46HX751/55HX750/55HX751
SECTION 5 - UPDATES AND ADJUSTMENTS
Panel Name Model‐ID Product‐ID
LTY400HL0401 0C33A115 03042040
LTY400HL0402 0C33A115 03042040
LTY400HL0501 0C33A131 03042040
LTY460HQ0501 0D33A116 01042040
LTY460HQ0502 0D33A116 01042040
LTY460HQ0601 0D33A132 01042040
LTY460HQ0501 0C33A116 03042040
LTY460HQ0502 0C33A116 03042040
LTY460HQ0601 0C33A132 03042040
LTY460HQ0501 0C33A116 03042040
LTY460HQ0502 0C33A116 03042040
LTY460HQ0601 0C33A132 03042040
LTY550HQ0401 0D33A117 01042040
LTY550HQ0501 0D33A133 01042040
LTY550HQ0401 0C33A117 03042040
LTY550HQ0501 0C33A133 03042040
LTY550HQ0401 0C33A117 03042040
LTY550HQ0501 0C33A133 03042040
LTY550HQ0401 0D33A117 01042040
LTY550HQ0501 0D33A133 01042040
Software Version
Model ID
Product ID
Panel ID
6. Exit service mode by turning the TV power off.
7. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
8. Wait a minute while lights flash, and initial setup screen shows.
Resetting the Panel Operation Time
9. Proceed to "

RESETTING THE PANEL OPERATION TIME

After completing all steps, reset the panel operation time from the Self
Check screen.
Verify before proceeding to the next step:
; Updated the Software
; Confirmed Model ID and Product ID
1. Take the TV out of deep Standby mode by pressing
turn on the TV.
POWER
2. Press to turn the TV back off.
DIGITAL SERVICE
001 OP
000 VERS ---
<MAIN> <EXT>
DM1.027AAA AA RF:0000
WF1.002W00AA WF:9.2.1.12.4
DF3.130W00AA WF:0A
YM1.409W00AA FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA <PEM>
MID:0D33A116 -------------------
PID:01042040 -------------------
PNL:LTY460HQ0502 -------------------
-------------------
TUNER: ENABLE
".
POWER
to
40