Affixing The Optical Cable; Connecting The Power Supply Cable; About The Rs-232C/Remote In/Ir-Out Terminals - Yamaha YSP-1000 Owner's Manual

Affixing the optical cable

To prevent the optical cable from being unplugged, place the supplied cable clamp with the open side facing upward,
attach it to the rear panel of this unit in a suitable position and then affix the optical cable in the cable clamp.

Connecting the power supply cable

Once all other connections are complete, plug one end of the power supply cable into the AC IN terminal of this unit and
then plug the other end into the AC wall outlet.
To the AC outlet

About the RS-232C/REMOTE IN/IR-OUT terminals

The RS-232C, REMOTE IN and IR-OUT terminals do not support normal external component connections. These are
control expansion terminals for factory use only.
RS-232C terminal
RS-232C REMOTE IN
Optical cable
REMOTE IN terminal
AUX DVD TV/STB
COAXIAL
OPTICAL TV/STB
DIGITAL INPUT AUDIO
Attach to the rear panel of this unit
IR-OUT terminal
CONNECTIONS
23