Yamaha Digital Sound Projector YSP-900 Owner's Manual page 68

MANUAL SETUP
INPUT RENAME (Input rename)
Use to change the name of the input source in the OSD
and the front panel display. Press an input selector button
(TV, STB, DVD, VCR, or AUX) to select the component
you want to change the name for and then perform the
following procedure.
D)INPUT RENAME
DVD ->
p
[ ]/[ ]:Position
[ ]/[ ]:Character
[ENTER]:Return
1
Press / to place the _ (underbar) under
the space or the character you want to edit.
The _ (underbar) flashes.
2
Press / to select the desired character.
• You can use up to 8 characters for each input.
• Press to change the character in the following
order or press to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
+, etc.
3
Repeat steps 1 to 3 to rename each input.
4
Press ENTER to exit.
The new names are registered, and the display returns
to the previous screen.
66
En
DVD
p
ENTER
ENTER
ENTER