Silvercrest SHSD 2600 A1 Operating Instructions And Safety Instructions page 33

General safety instructions
DANGER: Risk of burns
 Always place a container of an appropriate size on the
holder filter (13). If the container is too small, it can overrun
and cause burns or damage to property.
 Do not remove the container while the water is being heated
and filled. Always wait until the filling process is complete
(drops of hot water can still drip from the hot water dispenser
even after the beep sounds).
WARNING about property damage
 Do not place items on the holder filter (13) or on the hot
water dispenser.
 Only operate the hot water dispenser on an even, stable and
heat-resistant surface.
 Never leave the hot water dispenser unattended during
operation.
 If necessary, place something underneath the device, as
work-surfaces are sometimes treated with detergents which
could attack or even dissolve the non-slip feet (11).
DANGER: Risk of electric shock
 If the power cable (10) of this device is damaged, it must be
replaced by the manufacturer, its customer service or a
similarly qualified person, in order to avoid any possible
SilverCrest SHSD 2600 A1
English - 31